Kegging Updates: Raspberry Belgian, Thumbspike Saison 2.1

I’ve done a decent bit of kegging this past week, to square away some beers slated for the Lake Arrowhead Brewfest that I’ll be serving with Horse Thief Brewers. The festival is just under a month away, but with a new baby soon to arrive in the household I know that time will be tight. Gotta keg while the kegging’s good!

Raspberry Belgian, transferring to the keg

Raspberry Belgian 1.1, transferring to the keg

My cold storage space is also tight, so I’ve decided to get the beers carbonated and conditioned using a more “traditional” keg priming technique. Not only does it cut down on my CO2 usage, but it also should help to eat up any residual oxygen from the transfer and help the beers stay a bit fresher. Now of course it would be ideal to do the full keg purge with CO2 and closed transfer thing. But as I said…I’m tight for time and not keen on always blowing through my CO2 supply. I also feel that these two beers should hold up pretty well (both are fairly high alcohol and one is quite tart); if it was a delicate lager, crystal malt heavy porter, or hoppy IPA, I would definitely do things differently.

In any case, here are the details on everything.

Thumbspike Saison 2.1

I brewed this beer on June 25, and fermented it at the ambient temperature–around 75° on up. I kegged the batch on 12 July 2017, with 2.75 oz. of corn sugar boiled in 1 cup of water. Around 5 gallons went into the keg. Final gravity was 1.003, down from 1.055. This works out to around 6.8% abv.

Raspberry Belgian 1.1

I brewed this beer on 27 June, fermenting it at around 66°. On the fourth day of fermentation, 1 July 2017, I added around 1L (~4.25 cups) of Vintner’s Harvest raspberry puree. After about a week, I moved it out of the fermentation chamber to finish out at ambient temperature, around 78°.

I kegged the beer on 14 July 2017. The flavor was nice and tart, although at this point the raspberry comes through more in the aroma than in the flavor. I will have to see if that changes when I chill it and serve it carbonated; there might be some minor adjustments required prior to the festival, if that’s the case.

Because I wanted to keep this beer for home use too, I split it between two mini-kegs. Three gallons went into one, with 1.82 ounces of corn sugar boiled in 1 cup water (targeting around 3 volumes of CO2). The remaining 2 gallons or so went into another keg, which I force carbonated to around 2.8 volumes.

Final gravity for this batch was 1.013, down from 1.044. That clocks in at 4.1% abv–a very nice session beer!

Thumbspike Saison 2.1

The Lake Arrowhead Brewfest is coming up in August, and I’ll be there with the Horse Thief Brewing Association to serve up some tasty homebrews! I’ve promised two beers–one is the second iteration of my raspberry Belgian, and the other is my wild hop saison! I recently kicked the keg on this one, and I was overall pretty pleased with it.

The latest version of Thumbspike Saison is virtually identical to the last, with only a few very minor changes. First, I did a mix of Bohemian and Belgian pilsner malt for the grist, because my floor-malted Bohemian pilsner malt was nearly gone. Second, I ditched the rice hulls from the grist, because the percentage of wheat was so low as to be a non-issue for sparging (and this was proven in the easy collection of the first and second runnings). Finally, I modified the hop schedule very slightly to try and increase the hop character in the brew.

20170625_205023

Thumbspike Saison 2.1

  • 5.25 lbs. Château Pilsen malt (Castle Malting)
  • 4 lbs. floor-malted Bohemian pilsner malt (Weyermann)
  • 0.75 lbs. Munich I malt (Weyermann)
  • 0.75 lbs. white wheat malt (Great Western Malting Co.)
  • 1 oz. Carafa Special II (Weyerman)
  • 1.1 oz. whole wild hops (5.8% alpha), 60 minute boil
  • 0.5 oz. whole wild hops (5.8% alpha), 10 minute boil
  • 1 oz. whole wild hops (5.8% alpha), 2 minute boil
  • 1 Whirlfloc tablet, 10 minute boil
  • 2 pkg. French Saison Ale dry yeast (Mangrove Jack’s M29)

Target Parameters

  • 1.056 o.g., 1.003 f.g., 7.0% abv, 26 IBU, 7 SRM, 5.5 gallons into the fermenter
  • 90 minute mash at 148°, batch sparge, 60 minute boil

Procedure

  • To use up my RO water and thin out the Claremont waters a bit, I added 1.5 gallons with 2.2 gallons of tap water for my mash water. I heated it up to 160°, added the water to the mash tun, and let it slide to 157°, before adding the grains. This hit a mash temperature of 148.3°, which was down to 144° after 90 minutes.
  • After 90 minutes, I added 1.2 gallons of water at 170°, let it rest for 10 minutes, vorlaufed, and collected the first runnings. I then added 3.5 gallons of water at 170°, let it sit for 10 minutes, vorlaufed, and collected the remainder of the runnings.
  • In total, I collected 6.75 gallons with a gravity of 1.048, for 80% efficiency.
  • I aimed for a 60 minute boil, adding the various hops and finings per the schedule.
  • After 60 minutes, I turned off the flame and started chilling. Once I hit 85° (which is pretty close to the limit of what I can chill with our water during the summertime!), I transferred to the primary fermenter and pitched the yeast.
  • I brewed this beer on June 25, 2017. Starting gravity was 1.055, nearly exactly hitting my target gravity.
  • I plan to ferment at ambient temperature, which is around 75°. It will probably sit for a few weeks, because I am in no particular rush to get this batch on tap.

Beer Tasting: Hell Creek Amber Ale 1.1

20170611_212509

Hell Creek Amber Ale, appropriately served in a fossil-themed glass

The keg is gone barely a week for my wild hop amber ale, so it’s better late than never in posting this review. Also, I bottled up a few of these and enjoyed sharing them with some folks at Homebrew Con (including a paleontologist or two)!

  • Aroma
    • Malt dominates the aroma, with malty-sweet toffee and light caramel character. No appreciable yeast or hop character.
  • Appearance
    • Very clear beer with a deep amber color. The head is ivory in color, and settles down to a low but persistent quality.
  • Flavor
    • Hoppiness dominates on the front end of the flavor, and persists throughout the tasting and into the finish. The hop character is fairly herbal, and the bitterness has a slight rough edge to it. The malts come across moderately, with a caramel and bready quality. There is a minerally character to this, and next time I’ll probably adjust the water a bit to lower that. 100 percent Claremont tap water apparently doesn’t work with this recipe!
  • Mouthfeel
    • Moderate body and moderate carbonation. The finish tends toward the dry and bitter side.
  • Would I brew this again?
    • This is an improvement, certainly, on the last version of this beer. I think it was a good move to ditch the special B. This is an interesting beer, because I “have” to brew it within some self-imposed constraints (only Montana/South Dakota ingredients). I would say that the beer doesn’t age entirely well, probably due to the high percentage of caramel malts, and had a bit of an oxidized note towards the end of the keg. For the next iteration of this recipe (assuming there is a next, of course!), I’ll probably switch up the grain bill and see what other amber ale recipes are out there. The caramel is just a touch heavy in this for my tastes. As noted above, I’ll also play with the water a bit.
  • Overall
    • 6.5/10

Beer Tasting: Thumbspike Saison 2.0

20170623_160401I managed to do a tasting with the very last glass of this! Talk about good timing.

  • Appearance
    • Thick white head, with excellent persistence. The beer itself is medium gold, with a slight haze.
  • Aroma
    • Tart aroma, with a hint of breadiness behind that.
  • Flavor
    • Pleasantly tart and very slightly fruity, with a bready maltiness that is quite pleasant. This is a moderately bitter beer, although the bitterness has a slight rough edge to it. I’ll blame the wild hops for that.
  • Mouthfeel
    • Light bodied, moderately high carbonation, and a nice dry finish.
  • Would I brew this again?
    • This is a surprisingly nice beer! I’m not sure what I expected, but in the end it turned out pretty good, especially with a bit of maturation. In the future, I might play with the hop bill, to take a bit of the “edge” off (probably due to the wild hops), but as a ‘gimmick’ beer this ain’t half bad! I like how the yeast worked in this one — the dominant tartness with a bit of fruitiness behind that makes for a tasty combination. It’s a bit different from the slightly more clove-y flavor I get from traditional Belgian saison yeasts, and I rather enjoyed it. Thumbs up for the Mangrove Jack M29 saison strain!
  • Overall
    • 7/10

Thumbspike Saison 2.0

I’ve only brewed a saison once before, and it turned out pretty decent. Not perfect, but decent. I dry hopped just a touch too much last time, and so the hop aroma overwhelmed the yeast character. Thus, I decided to ditch the dry hops entirely on this batch. My recipe is similar to what I used before, with a few differences on several fronts. First, I added a touch of Carafa II for color, and ditched the honey in favor of a lower mash temperature to dry things out a bit. Also, I had some wild hops left, and a saison seemed like a good place to let those meld with a strong yeast. Finally, I decided to try Mangrove Jack dry yeast, and see what that does for everything.

20170512_192441

A view of the brew kettle, just prior to the start of the boil

Thumbspike Saison 2.0

  • 9.25 lbs. floor-malted Bohemian pilsner malt (Weyermann)
  • 0.75 lbs. Munich I malt (Weyermann)
  • 0.75 lbs. white wheat malt (Great Western Malting Co.)
  • 1 oz. Carafa Special II (Weyerman)
  • 1.1 oz. whole wild hops (5.8% alpha), 60 minute boil
  • 1.15 oz. whole wild hops (5.8% alpha), 10 minute boil
  • 1 Whirlfloc tablet, 10 minute boil
  • 2 pkg. French Saison Ale dry yeast (Mangrove Jack’s M29)

Target Parameters

  • 1.057 o.g., 1.003 f.g., 7.0% abv, 29 IBU, 7 SRM, 5.5 gallons into the fermenter

Procedure

  • To use up my RO water and thin out the Claremont waters a bit, I added 1.25 gallons with 2.42 gallons of tap water for my mash water. I heated it up to 165°, added the water to the mash tun, and let it slide to 158.3°, before adding the grains. This hit a mash temperature of 148.7°, which was down to 147.1° after 20 minutes. The temperature didn’t drop much beyond this, and was hovering around 147° when I checked 60 minutes later.
  • I aimed for a 75 minute mash duration. After 65 minutes, I added 1.3 gallons of water at 180°, to raise the mash temperature to 150.4°. I let it rest for 10 minutes, vorlaufed, and collected the first runnings. I then added 3.3 gallons of water at 165°, let it sit for 10 minutes, vorlaufed, and collected the remainder of the runnings.
  • In total, I collected 6.75 gallons with a gravity of 1.047, for 77% efficiency.
  • I aimed for a 60 minute boil, adding the various hops and finings per the schedule.
  • After 60 minutes, I turned off the flame and started chilling. Once I hit 85°, I transferred to the primary fermenter and pitched the yeast.
  • I plan to have 80° as my base temperature, and let it free-rise from there as needed. I’ll probably leave it in the fermenter for at least 10 days.
  • I brewed this beer on May 12, 2017. Starting gravity was 1.055, just a hair under my target gravity. A successful brew evening all around!