Tag Archives: tastings

Session Stout 2020

Posted on by

I like session beers! I like stouts! Let’s do another one!

This recipe is a minor modification of a previous session stout. The main malt change was to swap in Vienna malt for Maris Otter, and use full-octane chocolate (350 SRM) versus the pale chocolate (225 SRM) that I used last time. Because this isn’t really a hop-centered beer, I switched the hops over to just a small charge of Magnum at the beginning of the boil. I also decided to swap flaked oats for flaked barley, because why not?

Session Stout 2020

  • 6.25 lb. Vienna malt (Weyermann)
  • 1 lb. flaked oats (Quaker Old Fashioned Oats)
  • 0.75 lb. roasted barley (Briess)
  • 0.5 lb. chocolate malt (Briess)
  • 0.25 lb. black malt – 2-row (Briess)
  • 0.125 lb. rice hulls
  • 0.60 oz. Magnum hop pellets (13.2% alpha), 60 minute boil
  • 1 Whirlfloc tablet, 5 minute boil
  • 1 pkg. Safale American ale yeast (US-05)

Target Parameters

  • 1.041 s.g, 1.011 f.g., 3.9% abv, 31 IBU, 35 SRM
  • Infusion mash, 156°, no sparge
  • Claremont tap water, with Campden tablet to remove chloramine

Procedure

  • I mashed in with 7.25 gallons of water at 161°, to hit a mash temperature of 156°. I started recirculating after 10 minutes, for a total of 60 minutes in the mash. I neglected to do a mash-out–oops!
  • After draining the grain basket, I had 6.5 gallons of runnings with a gravity of 1.033, for 67% mash efficiency. For this batch, I’m still trying to dial in my efficiencies on the Anvil, so I was a touch on the lower side of what I intended.
  • I brought the kettle to a boil, adding hops and finings per the recipe. After 60 minutes, I turned off the heat and chilled the wort, before transferring it to the fermenter.
  • Starting gravity was 1.038, a little lower than targeted (1.041). Oh well! I brewed this beer on 7 November 2020, and fermented at around 66°.
  • I kegged the beer on 22 November 2020, hitting 1.017 final gravity. This equates to only 2.8% abv! As is usual these days, I used keg conditioning to carbonate this batch. It took 2.7 ounces of corn sugar in 1 cup of water. After 2 weeks, I topped up the CO2 level with force carbonation.

Tasting

  • Appearance
    • Pours with a beautiful and highly persistent deep tan head; the beer itself is clear and deep brown, almost black.
  • Aroma
    • Coffee aroma with a touch of chocolate; no hops to speak of; very clean character overall.
  • Flavor
    • Coffee and roast malt notes predominate; not much for “maltiness” otherwise. Moderate, very clean bitterness.
  • Mouthfeel
    • Very light bodied, pretty dry on the finish with a lingering but not unpleasant bitterness. Moderate level of carbonation.
  • Would I brew this again?
    • Absolutely! For what it is–a dry, relatively light session beer–it’s pretty darned satisfying. The background malt body is a little light, but that’s OK. I expected a little more sweetness given the higher finishing gravity. Not sure what’s up with that.
  • Overall
    • 7/10

Kveik the Keg Brown Ale

Posted on by

As the days turn towards winter, I’m in a dark [beer] mood. This is the time of year when I really like having a stout, porter, brown ale, or even an amber ale on tap to round out my beer choices.

To kick things off for the fall/winter dark beer season, I brewed up “Kveik the Keg Brown Ale.” It’s a total experiment, pulling together something that’s vaguely an American-style brown ale, with a repitch of the Hornindal kveik culture used in my recent pale ale. The idea was to make a sessionable beer holding ample malt character and a citrus highlight…something like a “chocolate orange” feel. I modified this from the Wasatch Premium Ale recipe in the Brewing Session Beers book by Jennifer Talley, because it looked like it had many of the initial features I was hoping for. For the malt base, I mixed American 2-row and light Munich malt, supplemented by a hefty dose of crystal 75, some chocolate malt, and a touch of Carafa Special III for color. For hops, I used all whole-Cascade hops. The Hornindal culture, which produces a subtle citrus character, would hopefully work alongside the Cascade. As you’ll see in the tasting notes, this was a pretty successful experiment!

Kveik the Keg Brown Ale

  • 6.25 lb. 2-row brewer’s malt (Great Western)
  • 2.5 lb. Munich light malt (Chateau)
  • 1 lb. crystal 75 malt (Great Western)
  • 2.6 oz. Carafa Special III malt (Weyermann)
  • 2.5 oz. chocolate malt (Briess)
  • 1 oz. Cascade whole hops (5.5% alpha), 60 minute boil
  • 0.5 oz. Cascade whole hops (5.5% alpha), 30 minute boil
  • 1.5 oz. Cascade whole hops (5.5% alpha), 10 minute boil
  • 1 tsp. yeast nutrient, 10 minute boil
  • 1 Whirlfloc tablet, 5 minute boil
  • Hornindal Kveik (Omega OYL-091), repitched from previous batch
  • 1 oz. Cascade whole hops (5.5% alpha), dry hop in fermenter

Target Parameters

  • 1.044 s.g., 1.011 f.g., 4.4% abv, 18 SRM, 33 IBU
  • Infusion mash, 156°, batch sparge; 60 minute boil
  • Claremont water, with Campden tablet to remove chloramines.

Procedure

  • I mashed in with 3.4 gallons of water at 166°, to hit my mash target of 156°. After 40 minutes, I added 1.5 gallons of hot water (~175°), to raise the mash temperature to 164°. I let this sit for 10 minutes, vorlaufed, and collected the first runnings.
  • Next, I added 3.75 gallons of hot water, to hit a ~164° mash temperature. I let this sit for 10 more minutes, vorlaufed, and collected the second runnings.
  • In total, I collected 7.3 gallons of runnings at a gravity of 1.038, for 76% mash efficiency.
  • I brought the runnings to a boil, and added hops, nutrients, and finings per the indicated schedule. After 60 minutes, I turned off the heat, chilled the wort down to 89°, and transferred it to the fermenter.
  • I brewed this beer on 19 September 2020. Starting gravity was 1.045, pretty close to my target. I pitched around 8 ounces of yeast slurry (which had been harvested a week prior), and saw signs of fermentation within 90 minutes of pitching the yeast! Within 18 hours, there was vigorous fermentation. What a solid start for this culture! I fermented this at ambient temperatures.
  • On 23 September, I added 1 oz. of dry hops directly to the fermenter.
  • I kegged the beer on 3 October 2020, adding 2.8 oz. of corn sugar boiled in 1 cup of water. The keg sat at ambient for ~10 days, before I topped up the pressure using force carbonation.
  • Final gravity was 1.017, down from 1.045, for 3.6% abv.
Kveik the Keg Brown Ale

Tasting

  • Appearance
    • Very clear, deep brown beer with a persistent ivory head. It is exceptionally pretty!
  • Aroma
    • Moderate chocolate character to the malt aroma, with a slight citrus character, presumably from the yeast and hops. Very clean!
  • Flavor
    • The beer has a surprisingly rich, bready malt base (must be that Munich malt!), with a dark caramel and chocolate character behind that. Bitterness is at a moderately high level, but not over the top relative to the malt. There is definitely an orangey citrus character in play here.
  • Mouthfeel
    • Moderate carbonation, with a fairly light body and a crisp finish. There is a very slight bit of what might be astringency on the extended finish, but it’s barely noticeable. It’s not harsh at all, but does seem a touch out of balance with the rest of the beer.
  • Would I brew this again?
    • Yes! I might make a few minor modifications, perhaps to dial the bitterness back just a touch and maybe reduce the dry hopping level or dry hopping time. I think the beer would also benefit from swapping out the 2-row base malt with a Vienna or Maris Otter-type malt, to enrich the malt character. All that said, it’s overall a pretty good beer. I really like how the kveik culture worked in this beer, and it’s pretty nice to find something for this yeast that’s not yet another oversaturated IPA. I’ll probably be brewing more beers like this down the road!

Dog Days Pilsner

Posted on by

As the summer reached its peak of heat near the end of August, pilsners were always on my mind. There’s nothing more refreshing than sitting out on the patio at the end of an afternoon, with a Willi Becher of freshly poured pilsner. I find that a good pilsner with some character can also work as a fall beer…basically, a classic German pils is the year-round beer in my world!

So, during the Dog Days of Summer, I crafted this Dog Days Pilsner recipe. I kept the malt bill super simple, with pilsner malt and a touch of CaraPils to round out the mouthfeel. Although I often go for a SMaSH-type strategy for hopping, this time I wanted to build up some layers of hop character. Finally, I wanted a little more yeast character, so went with the White Labs’ Oktoberfest/Marzen recipe, instead of my usual W34/70. Those strategies paid off nicely in the end!

Dog Days Pilsner

  • 9.5 lb. Pilsner malt (Weyermann)
  • 6 oz. Carapils malt (Weyermann)
  • 4 oz. acidulated malt (BestMalz)
  • 1 oz. Sterling hop pellets (7.4% alpha), 60 minute boil
  • 1 oz. Saaz hop pellets (5.3% alpha), 20 minute boil
  • 0.55 oz. Hallertauer Mittelfrueh hop pellets (3.2% alpha), 5 minute boil
  • 1 tsp. Fermax yeast nutrient, 10 minute boil
  • 1 WhirlFloc tablet, 5 minute boil
  • 1 pkg. Octoberfest/Marzen lager yeast (WLP 820), in 1.75L vitality starter

Target Parameters

  • 1.046 s.g., 1.015 f.g., 4.1% abv, 3 SRM, 37 IBU
  • Infusion mash, 155°, batch sparge; 60 minute boil
  • Claremont water, adjusted with lactic acid and gypsum to achieve 66 ppm Ca, 30 ppm Mg, 81 ppm Na, 107 ppm SO4, 90 ppm Cl, est. 30 ppm HCO3; alkalinity 25 ppm, effective hardness 65 ppm, RA -40 ppm

Procedure

  • The morning of my brew day, I spooled up a 1.75L vitality starter for the yeast, and ran it on my stir plate.
  • To prepare my water, I added 9 mL 88% lactic acid to 8.25 gallons of tap water along with a Campden tablet, and then 4g gypsum. This was done to knock out the carbonates and approximate a target of 66 ppm Ca, 30 ppm Mg, 81 ppm Na, 107 ppm SO4, 90 ppm Cl, est. 30 ppm HCO3; alkalinity 25 ppm, effective hardness 65 ppm, RA -40 ppm.
  • I mashed in with 3.5 gallons of water at 162°. Mash temp was a bit low at 151.5°, so I added 3 quarts of water at 178°, to hit 155.5°. I added 0.75 mL of 88% lactic acid to the mash, to lower pH to an estimated target of ~5.45.
  • After 60 minutes, I added 0.75 gallons of water at 185°, let it sit for 10 minutes, vorlaufed and then collected the first runnings. I added the remainder of the sparge water, and collected second runnings.
  • In total, I collected 6.8 gallons of runnings at 1.043, for ~77% efficiency.
  • I brought the runnings to a boil, adding hops and kettle finings per the schedule. After a 60 minute boil, I turned off the heat and chilled down to 85° with my cooling coil. I transferred to the fermenter and cooled the rest of the way (~52°) in the fermentation chamber. This final chill took around six hours.
  • I gave the wort a 30 second blast of pure oxygen, and then pitched the yeast.
  • I brewed the beer on 15 August 2020, and started fermentation at 54°.
  • I raised the temperature to 56° on 31 August, 58° on 2 September, and then 60° on 4 September. I held it at 60° for 12 hours, and then started the downward trend. It was at 57° on 5 September, 50° on 6 September, 45° on 7 September, 40° on 8 September, and 35° on 9 September. The final step was down to 32° on 10 September, and I held it there until kegging on 26 September 2020.
  • The final gravity was 1.011, down from 1.049, for 5.0% abv.

Tasting

  • Appearance
    • Clear, just shy of brilliant. Light gold color, with a fine and persistent white head.
  • Aroma
    • Moderate level of malt aroma comes through, with a grainy sweet character. The hops come across amazingly, with a moderately prominent floral quality.
  • Flavor
    • Moderate grainy-sweet malt character–just gorgeous! The bitterness is moderately high, with a clean and slightly herbal character.
  • Mouthfeel
    • Moderately light body, with a crisp and slightly dry finish and moderate carbonation.
  • Would I brew this again?
    • This is a really nice pilsner. The aroma and malt character are perfect. I can’t think of much I would change with this one, other than letting it lager a touch more before it goes on tap. In the last part of the keg that I’m on right now, it’s looking really nice!
    • My typical German pils recipes are on the upper end of bitterness for the style (37 IBU here, versus 40 max in the BJCP guidelines). At some point, I should probably play around with recipes at the lower end of the IBU spectrum…
  • Overall
    • 9.5 / 10 (slight ding for initial clarity)

Kveik Pale Ale

Posted on by

It happened…I’ve given in to a brewing trend, and am trying a recipe with kveik. As you’ll see in some upcoming posts, I’ve in fact tried a few kveik recipes at this point. This is my first one, and admittedly not my favorite.

red package of yeast from Omega Yeast, Hornindal Kveik strain, with cartoon of cat on front
Kveik culture from Omega

For those not familiar with it, kveik is essentially a Norwegian farmhouse ale culture, with a rich cultural history that has likely been over-analyzed by those outside of the original neighborhoods where the yeast originated. I’ve been intrigued by their stated qualities of fermenting cleanly in excess of 90°, which almost sounds too good to be true. It wasn’t, in the end!

The recipe is inspired by a kit recipe from Atlantic Brew Supply, with major adjustments to pretty much everything. Many of the kveik-centered recipes out there are super-high alcohol, and that just doesn’t interest me. Session ales forever! I looked around at a few different kveik strains, and Hornindal from Omega seemed to hit the balance of a citrusy character that I wanted. I went with my usual session pale ale strategy of Vienna plus some Munich and a little crystal malt. For the hops, I grabbed a South African experimental variety, U1/108, from my local homebrew shop.

Kveik Pale Ale

  • 8 lb. Vienna malt (Weyermann)
  • 1 lb. Munich light malt (Chateau)
  • 0.5 lb. Crystal 40 malt (Great Western)
  • 0.75 oz. Magnum hop pellets (13.2% alpha), 30 minute boil
  • 1 tsp. Fermax yeast nutrient, 10 minute boil
  • 1 Whirlfloc tablet
  • 1 oz. African Experimental U1/108 hop pellets (15.0% alpha), 5 minute boil
  • 1 oz. African Experimental U1/108 hop pellets (15.0% alpha), 15 minute whirlpool
  • 3 oz. African Experimental U1/108 hop pellets (15.0% alpha), dry hop in keg
  • 1 pkg. Hornindal Kveik (Omega OYL-091)

Target Parameters

  • 1.043 s.g., 1.011 f.g., 4.3% abv, 6 SRM, 41 IBU
  • Infusion mash, 156°, batch sparge; 45 minute boil
  • Claremont water, with Campden tablet to remove chloramines and 2 g of gypsum added to boil kettle.

Procedure

  • I mashed in with 3.25 gallons at 168°, to hit a 158° mash temperature. I also added 4 mL of 88% lactic acid to the mash, to adjust pH.
  • The mash temperature was down to 156° after 45 minutes. At this point, I added 1.5 gallons for the first sparge, which raised the temperature to 162°. After 10 minutes, vorlaufed and collected the first runnings. Next, I added 3.6 gallons for the second sparge, with a vorlauf after 10 minutes.
  • In total, I collected 7 gallons with a gravity of 1.039, for 77% mash efficiency.
  • In the kettle, I added 2 g gypsum, and the broil everything to a boil. I boiled for 45 minutes, adding hops and other items per the schedule.
  • After flame-out, I chilled the wort to below 185° and then added 1 oz. of whirlpool hops. Hops were between 175° and 180° for 10 minutes. Then, I continued chilling.
  • After I chilled the wort down to 90°, I let it settle for 1 hour and then transferred to the fermenter and pitched the kveik.
  • The fermenter showed minor activity within 6 hours, and vigorous bubbling within 18 hours. At this point, I measured ~85° degrees for fermenter temperature, with 80° degrees ambient in the garage. I started fermentation on September 5, and fermentation seemingly was done by 9 Sept 2020.
  • I kegged the beer on 13 September 2020, adding dry hops in a baggie at that time. As has been my usual practice lately, I did a mixture of keg priming and force carbonation, targeting 2.7 volumes of CO2. I added 2.8 oz of corn sugar dissolved in one cup water for this first stage, and after a week topped up the CO2 using my cylinder.
  • Final gravity is 1.017, for 3.6% abv.

Tasting

  • Appearance
    • A hazy gold beer, with a pillowy, fine, and very persistent white head
  • Aroma
    • Aroma is malt-centered, very bready and showing a bit of caramel. Hop aroma is surprisingly low.
  • Flavor
    • Very hoppy, with a slightly rough bitterness. The malt in the background has a bready and toasty quality.
  • Mouthfeel
    • Light bodied, slightly astringent finish, probably from the dry hops. Moderately high carbonation.
  • Would I brew this again?
    • Not with this particular hopping regimen. The malt character is fine, and the yeast character is fantastically clean for having been fermented at high temperature, but the hops just don’t do it for me. I wonder if it’s a combination of the hop variety with the low starting gravity, so that the hops aren’t balanced more by the malt. I also think I overhopped on the dry-hopping, so I can’t blame it all on the hop variety. Honestly, the beer was far better before I added the dry hops! That said, I’m super impressed by the yeast, and harvested a ton for use in some upcoming batches.
  • Overall
    • 4/10

Claremonter Weisse 2020

Posted on by

As summer and summer temperatures drag on here in southern California, I’m spending my brewing energy on light, flavorful, and refreshing beers. This often means lagers, but sometimes it’s nice to play on the sour side of the street. A few years back, I brewed an award-winning Berliner Weisse, which tasted fantastic. I’ve been wanting to revisit that style and that recipe for awhile, and finally made some time this summer.

For my 2020 brew, I rolled with a similar recipe to my 2016 version, except for the sour pitch. Last time, I used Omega Labs OYL-605 lacto blend. This time around, I had a satchet of Lallemand’s Wildbrew Sour Pitch, which had already been opened for my Raspberry Belgian. Not wanting to waste a good culture, I made the decision to use this instead. I didn’t have to make a starter, which was a nice bonus. I switched in 2-row for pilsner malt, to up the malt character a little for such a low gravity beer. Finally, for the main fermentation, I made the very minor substitution of US-05 instead of WLP001.

Claremonter Weisse 2020

  • 2.25 lb. premium 2-row malt (Great Western)
  • 2.25 lb. pale wheat malt (Weyermann)
  • 2 oz. rice hulls
  • 0.5 pkg. Wildbrew Sour Pitch dry culture (Lallemand)
  • 1 tsp. Fermax, 10 minute boil
  • 0.5 oz. Cascade whole hops (5.5% alpha), 8 minute boil
  • 1 Whirlfloc tablet, 5 minute boil
  • 1 pkg. Amercan Ale Yeast (US-05)

Target Parameters

  • 1.031 s.g., 1.007 f.g., 3.2% abv, 3 SRM, 5 IBU
  • Full volume, no-sparge infusion mash, 152°; 10 minute initial boil, kettle sour; 60 minute secondary boil with hops, nutrients, and finings
  • Claremont water, unadjusted

Procedure

  • I mashed in with 4.8 gallons of water at 155°, to hit 151° in the mash. I added 2 mL of 88% lactic acid to adjust mash pH.
  • After 20 minutes, the mash was down to 149°. After 60 minutes of total mash time, I vorlaufed and collected the runnings. I only had a gravity of 1.026, for 65% efficiency.
  • I boiled for 10 minutes, chilled the wort down to 102°, and added 2.5 mL of 88% lactic acid to bring down the pH. Then, I added 5 g of Sour Pitch culture, and let it sit on a heating pad for ~100° temperature maintenance. This was started on 24 July 2020.
  • After 24 hours, I sampled the wort. It wasn’t quite tart enough yet, so I decided to let it go another 24 hours. When I sampled it on 26 July 2020, it was less tart than expected, but I figured 48 hours at 100° was enough time for the bacteria to work their magic.
  • I boiled the soured runnings for 60 minutes, and added the hops and other finings per the recipe. After 60 minutes, I chilled the wort and transferred it to the fermenter.
  • Starting gravity was 1.031, with ~3.25 gallons into the fermenter on 26 July 2020. I started fermenting at 66°.
  • I moved the beer to ambient temperature on 8 August 2020, to let it finish up.
  • I kegged the beer on 13 August 2020, putting it in one of my 2.5 gallon kegs. I added 3.95 oz. of corn sugar for natural carbonation, sealed it up, and let it sit for awhile.
  • Final gravity was 1.008, down from 1.031, for 3% abv. At the time of kegging, the beer had a gorgeous floral aroma, almost like orange blossom honey.
  • I checked on the natural keg pressure over a few days, as the keg sat at ambient temperatures. On 21 August (8 days post kegging), the keg had hit 32 psi (~2.4 volumes of CO2). On 23 August, the keg had hit 40 psi (~2.8 volumes of CO2). I gave it another day or two, there was no change in pressure, so I put the keg in the lagering chamber and topped up the carbonation level.
  • I measured the final pH at around 3.6.

Tasting

  • Appearance
    • Pale straw color and hazy, with a creamy white head that completely subsides after a few minutes.
  • Aroma
    • Tart, citrus blossom aroma, with a bit of floral honey. Really pleasant! There is a bit of a raw bread dough character behind all of it.
  • Flavor
    • Lemony tartness dominates, with the doughy malt character in the background. The level of sourness is moderately high, and it is a clean sour. I don’t really pick up any hop notes, which is expected given the low level of hopping.
  • Mouthfeel
    • Crisp and dry, but not astringent. Effervescent and highly carbonated, with a light body that makes this very easy to drink.
  • Would I brew this again?
    • Yes! This isn’t a style I want all of the time, or in massive quantities, but it’s really nice every once in awhile. This is a different take on the beer from the 2016 version I made, as expected with a different sour culture. It seems a bit less sour, but is still really nicely balanced. The aroma really is fine on this one, and a true highlight of the beer.
  • Overall
    • 9/10