Session Stout 2020

I like session beers! I like stouts! Let’s do another one!

This recipe is a minor modification of a previous session stout. The main malt change was to swap in Vienna malt for Maris Otter, and use full-octane chocolate (350 SRM) versus the pale chocolate (225 SRM) that I used last time. Because this isn’t really a hop-centered beer, I switched the hops over to just a small charge of Magnum at the beginning of the boil. I also decided to swap flaked oats for flaked barley, because why not?

Session Stout 2020

  • 6.25 lb. Vienna malt (Weyermann)
  • 1 lb. flaked oats (Quaker Old Fashioned Oats)
  • 0.75 lb. roasted barley (Briess)
  • 0.5 lb. chocolate malt (Briess)
  • 0.25 lb. black malt – 2-row (Briess)
  • 0.125 lb. rice hulls
  • 0.60 oz. Magnum hop pellets (13.2% alpha), 60 minute boil
  • 1 Whirlfloc tablet, 5 minute boil
  • 1 pkg. Safale American ale yeast (US-05)

Target Parameters

  • 1.041 s.g, 1.011 f.g., 3.9% abv, 31 IBU, 35 SRM
  • Infusion mash, 156°, no sparge
  • Claremont tap water, with Campden tablet to remove chloramine

Procedure

  • I mashed in with 7.25 gallons of water at 161°, to hit a mash temperature of 156°. I started recirculating after 10 minutes, for a total of 60 minutes in the mash. I neglected to do a mash-out–oops!
  • After draining the grain basket, I had 6.5 gallons of runnings with a gravity of 1.033, for 67% mash efficiency. For this batch, I’m still trying to dial in my efficiencies on the Anvil, so I was a touch on the lower side of what I intended.
  • I brought the kettle to a boil, adding hops and finings per the recipe. After 60 minutes, I turned off the heat and chilled the wort, before transferring it to the fermenter.
  • Starting gravity was 1.038, a little lower than targeted (1.041). Oh well! I brewed this beer on 7 November 2020, and fermented at around 66°.
  • I kegged the beer on 22 November 2020, hitting 1.017 final gravity. This equates to only 2.8% abv! As is usual these days, I used keg conditioning to carbonate this batch. It took 2.7 ounces of corn sugar in 1 cup of water. After 2 weeks, I topped up the CO2 level with force carbonation.

Tasting

  • Appearance
    • Pours with a beautiful and highly persistent deep tan head; the beer itself is clear and deep brown, almost black.
  • Aroma
    • Coffee aroma with a touch of chocolate; no hops to speak of; very clean character overall.
  • Flavor
    • Coffee and roast malt notes predominate; not much for “maltiness” otherwise. Moderate, very clean bitterness.
  • Mouthfeel
    • Very light bodied, pretty dry on the finish with a lingering but not unpleasant bitterness. Moderate level of carbonation.
  • Would I brew this again?
    • Absolutely! For what it is–a dry, relatively light session beer–it’s pretty darned satisfying. The background malt body is a little light, but that’s OK. I expected a little more sweetness given the higher finishing gravity. Not sure what’s up with that.
  • Overall
    • 7/10

The Celtic Elk Stout 1.1

Nearly five years ago, I made an Irish stout that tasted great and did well in competition. I gave another go this year, seeking a dark beer with lots of flavor but not a lot of booziness. It was a success!

The recipe is basically the same as last time, just with some minor ingredient adjustments.

The Celtic Elk Stout 1.1

  • 6 lb. Maris Otter malt (Crisp)
  • 1.5 lb. flaked barley
  • 13.6 oz. crystal 75 malt (Great Western)
  • 12 oz. roasted barley (Briess)
  • 10 oz. chocolate malt (Briess)
  • 4 oz. crystal 10 malt (Briess)
  • 3 oz. Blackprinz malt (Briess)
  • 3 oz. Carafa Special III malt (Weyermann)
  • 3 oz. rice hulls
  • 0.65 oz. Warrior hop pellets (15.8% alpha), 60 minute boil
  • 1 Whirlfloc tablet, 5 minute boil
  • 1 pkg. Irish Ale Yeast (WLP004)

Target Parameters

  • 1.045 o.g., 1.014 f.g., 4.1% abv, 35 IBU, 39 SRM
  • Infusion mash, 156° for 60 minutes, batch sparge
  • Claremont tap water

Procedure

  • The night before brewing, I made a 0.75 L starter, and let it run on the stir plate.
  • I mashed in with 3.5 gallons of water at 168°, to hit a mash temperature of 156°.
  • After 60 minutes of mashing, I added 1.5 gallons of water at 185°, let sit for 10 minutes, vorlaufed, and collected the first runnings. Next, I added 3.75 gallons of water at 185°, let sit for 10 minutes, vorlaufed, and collected the second runnings.
  • In total, I collected 7.5 gallons of runnings with a gravity of 1.045, for 87% efficiency! This was way too high, so I removed 0.5 gallons of runnings and added 0.5 gallons of tap water, to hit 1.041. This was much better. I saved 2 cups of this to use in bread (and it made tasty bread!).
  • I brought the kettle to a boil, adding hops and finings per the schedule. After 60 minutes, I turned off the flame and chilled the wort.
  • Once the wort was down to around 75°, I transferred to the fermenter and chilled the rest of the way down to 66°. Finally, I pitched the yeast.
  • I brewed this beer on 18 April 2020. Starting gravity was 1.050.
  • I fermented the beer at 66°, and kegged the beer on 25 April 2020. To save some CO2 and try keg conditioning, I primed the keg with 2.1 oz. of corn sugar in boiling water.
  • Final gravity was 1.019, for 4.1% abv.

Tasting

  • Appearance
    • Dark! Black in the glass, and a deep, dark brown if you get a thin sliver of beer. Thin but persistent brown head.
  • Aroma
    • Rich aroma of chocolate with a touch of roasted coffee. There are hints of dried cherry behind that; I don’t think it’s esters (because the flavor of the beer is pretty clean in terms of yeast character), but a synergistic effect of the dark malts. I like it!
  • Flavor
    • Roasted coffee character at the outset, with a touch of dark chocolate behind that. There is a really nice coffee-type bitterness from the malt than creeps in alongside the hop bitterness. Hop bitterness is clean. The flavor is malt forward, with hops secondary, until the finish. There is an extended, slightly bitter (but not unpleasant) finish.
  • Mouthfeel
    • Dry, medium-light body, moderate carbonation.
  • Would I brew this again?
    • This is a great recipe, and a fine interpretation of the style. I think my modifications were okay overall, although I’ll replace the Carafa III with all debittered black malt next time, and use pale chocolate instead of regular chocolate malt, because the malt was just a little too much chocolate and not enough roast. As the beer matures, it has really come into its prime. I rushed it just a touch to get it on-tap, and so it had a hint of sweetness at first from the corn sugar used for priming (at least I think that’s what I was experiencing). That’s gone away now. This recipe produces a really quaffable beer, and the low alcohol level (4.1% abv) isn’t really a flavor/mouthfeel detriment thanks to the malt character.
  • Overall
    • 9/10

Session Stout II

A little over a year ago, I brewed a batch of Irish stout based on a recipe in Jennifer Talley’s wonderful book, Brewing Session Beers. The result was pretty enjoyable, so I wanted to revisit the recipe. The main changes from the previous version was a different base malt (Maris Otter instead of American two-row) and using pale chocolate instead of full-on chocolate malt.

The end result was something that is almost there, but in need of a few last tweaks. I love it as a low-alcohol session beer, but feel it still needs a bit more body. I’ll certainly be coming back to this in the future!

Session Stout II

  • 6 lbs. Maris Otter Malt (Bairds)
  • 1 lb. flaked barley
  • 12 oz. roasted barley (Bairds)
  • 7.5 oz. pale chocolate malt (Crisp)
  • 4 oz. black barley (Briess)
  • 2 oz. rice hulls
  • 1 oz. Helga hop pellets (5.6% alpha), 60 minute boil
  • 1.09 oz. East Kent Goldings (6.0% alpha), 10 minute boil
  • 1 Whirlfloc tablet
  • 1 pkg. Safale American ale yeast (US-05)

Target Parameters

  • 1.042 s.g, 1.009 f.g., 4.4% abv, 31 IBU, 42 SRM
  • Infusion mash with batch sparge
  • Water built from Claremont tap water with Campden tablet.

Procedure

  • I mashed in with 166° strike water to hit a target temperature of 152°. After 60 minutes, I added 1.4 gallons of water at 185°, waited 10 minutes, vorlaufed and collected the first runnings. Next, I added 3.3 gallons of water at 185°, waited 10 minutes, vorlaufed, and collected the second runnings.
  • In total, I collected 6.25 gallons of water with a gravity of 1.035, for 71% efficiency.
  • I brought the kettle to a boil, adding hops and finings per the schedule. After 60 minutes, I turned off the heat and cooled down to yeast pitching temperature (combination of cooling coil and time in fermentation chamber after transfer).
  • I transferred the beer to the fermenter and pitched the yeast. I brewed this beer on 4 December 2018, and fermented at 66°. Starting gravity was 1.042.
  • I kegged the beer on 4 Janaury 2019, when it had a final gravity of 1.014. This equates to a measured abv of 3.7%.

Tasting Notes

  • Aroma
    • Chocolatey, roasty, very clean
  • Appearance
    • Deep deep brown, black in the glass; very fine light brown head with excellent persistance; brilliantly clear
  • Flavor
    • Deceptively light flavor, that tilts towards the roasted side with a hint of chocolate. Not a terrible amount of malt backbone. The roastiness is balanced well against the hoppiness. Moderately bitter beer.
  • Mouthfeel
    • Dry, light-bodied beer, with moderately high carbonation as perceived in the mouth.
  • Would I brew this again?
    • This is a pretty tasty, very drinkable beer. I feel like it is just a touch lighter on base malt character and mouthfeel than I like, although this is a pretty easy fix (a bit more base malt or perhaps use full octane chocolate malt instead of pale chocolate). The base recipe itself is pretty solid.
  • Overall
    • 6/10

Beer Tasting: Session Stout

stoutI’ve had this beer on tap for about a month; it has been really enjoyable!

Session Stout

  • The Basics
    • 1.042 s.g., 1.012 f.g., 3.9% abv, 31 IBU, 42 SRM
  •  Appearance
    • Clear, black beer, with a fine tan head that is moderately persistent. It looks awesome!
  • Aroma
    • The aroma has a prominent roasted character, with a tiny hint of chocolate behind that.
  • Flavor
    • The beer has a forward roasted/slightly burnt character with a dark coffee tone, as expected from the roast barley. The hop bitterness is smooth, in the background behind the malt.
  • Mouthfeel
    • The beer is fairly light bodied with moderate carbonation. The finish is dry, but smooth.
  • Would I brew this again?
    • I think so! It’s a very drinkable beer, both in terms of its flavor/mouthfeel as well as the low alcohol. I’ve been enjoying it quite a bit. If I were to make any minor changes, I would probably up the body just a little (it can tend to slightly thin after awhile). I might also experiment with a version that has more chocolate malt, to richen the  profile and make it a bit more complex than just roast barley.
  • Overall
    • 8/10

Session Stout

The past few months have been exceedingly packed for a variety of reasons, and so I’ve had little time to brew and even less time to blog! Here is a quick report on an Irish-like stout I brewed up around a month ago.

The intention for this recipe was to create an Irish-like stout; note that I say “Irish-like” because I didn’t go completely authentic with all ingredients. I also wanted something that was fairly low in alcohol and quite drinkable. Thus, I aimed for something <4.5% abv and fairly dry.

The recipe is modified (slightly) from a recipe in Jennifer Talley’s Session Beers book.

Session Stout

  • 6.46 lb. 2-row malt (Rahr)
  • 1 lb. flaked barley
  • 0.75 oz. roasted barley (Bairds)
  • 4.2 oz. black malt (Bairds)
  • 3 oz. chocolate malt (Briess)
  • 1 oz. pale chocolate malt (Crisp)
  • 4 oz. rice hulls
  • 0.5 oz. Warrior hops (15.8% alpha), 60 minute boil
  • 1 Whirlfloc tablet, 10 minute boil
  • 1 pkg. Irish ale yeast, prepared in 0.75L starter

Target Parameters

  • Infusion mash to hit target of 152°. Batch sparge.
  • Claremont tap water.
  • 1.043 o.g., 1.012 f.g., 4.2% abv, 31 IBU, 42 SRM, 5 gallons into fermenter

Procedure

  • I mashed in with 2.83 gallons of water at 162°, to hit a target temperature of 151°.
  • After 60 minutes, I added 1.65 gallons of water at 185° for the first batch sparge, let it sit for 10 minutes, vorlaufed, and collected first runnings. Then, I added 3.5 gallons of water at 185°, let sit for 10 minutes, vorlaufed, and collected the second runnings.
  • In total, I collected 6.5 gallons of wort at a gravity of 1.037. To this, I added 0.25 gallons of RO water to bring the volume up to 6.75 gallons.
  • I boiled for 60 minutes, adding hops and other ingredients at the times indicated in the recipes.
  • After flame-out and chilling, I aerated while transferring into the primary fermenter.
  • Starting gravity was 1.042, and I fermented at 67°. The beer was brewed on 9 October 2017.
  • I kegged this beer on 2 November 2017. The yeast had settled into a nice dense cake at the bottom of the fermenter.
  • Final gravity was 1.012, for 3.9% abv. This was pretty close to my target, so I’m happy. I force carbonated at high pressure with a little bit of shaking, and was drinking the beer within a day after kegging.
  • In my initial tasting, this beer pretty much hits all the notes I wanted. It’s a highly drinkable Irish-type stout with a good bit of flavor. I think this will be a good beer to kick off fall!