Author Archives: Andy Farke

Mahajanga IPA

Posted on by

Although my tastes tilt towards lower alcohol (<5.5% abv) beers, I like something a bit stronger as a treat now and then. I’ve previously enjoyed Avery Brewing Brewing Company’s Maharaja, a 10% abv double (triple?) IPA, and found a clone recipe in Craft Beer for the Homebrewer. I modified the hops in my version, with Chinook in place of Columbus and Centennial on the boil. On the dry hop end of things, I was much closer to the original recipe.

The name is a play on Avery’s brew, honoring a city in northwestern Madagascar where I spent a bit of time during my fieldwork in that country.

Mahajanga IPA

  • 10.5 pounds 2-row malt (Great Western)
  • 7 oz. biscuit malt (Dingemans)
  • 6 oz. crystal 120 (Great Western)
  • 1 oz. Chinook whole hops (13.1% alpha), 60 minute boil
  • 1 oz. Chinook whole hops (13.1% alpha), 30 minute boil
  • 1 lb. pilsen light dry malt extract, 10 minute boil
  • 1 Whirlfloc tablet, 5 minute boil
  • 1 tsp. Fermax yeast nutrient, 5 minute boil
  • 2 oz. Centennial hop pellets (8.1% alpha), 10 minute whirlpool
  • 1 pkg. Safale American Ale yeast (US-05)
  • 1 oz. Centennial hop pellets (8.1% alpha), dry hop in keg
  • 1 oz. Chinook whole hops (13.1% alpha), dry hop in keg
  • 1 oz. Simcoe hop pellets (13.6% alpha), dry hop in keg

Target Parameters

  • 1.088 o.g., 1.013 f.g., 10% abv, 113 IBU, 13 SRM
  • Claremont tap water, with 2 g of gypsum added at end of boil
  • Full volume mash, 90 minutes at 147°, mash out to 168°, ferment at 65°

Procedure

  • I mashed in full volume with ~5 gallons of water at 156°, to hit a mash temperature of 147°. I added ~4 mL of 88% lactic acid to adjust the mash pH.
  • After a 90 minute mash, I brought it up to 168° and held for 10 minutes before removing the grains.
  • I hit around 57% mash efficiency, with ~1.058 gravity for 4 gallons of runnings. This is pretty low, so I knew I would have to add a pound of DME.
  • I brought the runnings to a boil, adding hops, DME, and kettle finings per the recipe.
  • I added 2 g of gypsum at the end of the boil.
  • Approximately 3.4 gallons of wort went into the fermenter. I gave this 30 seconds of pure O2, and then pitched the yeast. It fermented at ambient (~64°).
  • I brewed the beer on 25 November 2020, and it had a starting gravity of 1.077.
  • I kegged the beer on 19 December 2020, adding the dry hops at that time. Final gravity was 1.014, for 8.5% abv. I’m thrilled that the beer attenuated fairly well!
  • I removed the dry hops on 27 December 2020, to avoid overhopping or harshness.

Tasting

  • Appearance
    • The beer has an orangish, burnished gold color; it’s slightly hazy, but not overly so. It pours with a persistent ivory head with really nice lacing.
  • Aroma
    • Slight caramel malt quality, and a prominent hop character of citrus rind and pine resin. There is no yeast character or hot alcohol character, which is awesome!
  • Flavor
    • The beer is quite bitter, with a grapefruit rind and pine resin character to the bitterness. The malt flavor is somewhat grainy, and relatively moderate compared to the hops. Yeast character is very clean. This is a hop-forward beer!
  • Mouthfeel
    • Medium-light body, with an off-dry finish and moderate carbonation.
  • Would I brew this again?
    • Overall, this is a great recipe that just requires some hop adjustment. The hop character is a bit one-dimensional, with the Chinook dominating everything else. If I rebrew this, I’ll go closer to the original recipe, and ditch Chinook for all but a small dry hop addition. The malt character is about perfect, with enough body to stand up to the hops. The yeast management was perfect on this one–it attenuated well, and the yeast character was clean rather than boozy or fusel-ridden.
  • Overall
    • 6/10

Pfriem Pilsner

Posted on by

I recently bought a Foundry brewing system, and chose a German pils as my first brew. First off, I really like this style. Importantly for a first spin on the Foundry, it gave me a chance to try out a step mash. The recipe is from Dave Carpenter’s Lager book, modified slightly for hop varieties. Otherwise, it’s pretty much as advertised.

Pfriem Pilsner

  • 9.5 lb. Pilsner malt (Weyermann)
  • 7 oz. Carafoam malt (Weyermann)
  • 3 oz. acidulated malt (Weyermann)
  • 0.6 oz. Perle hop pellets (7.1% alpha), 60 minute boil
  • 1 oz. Crystal hop pellets (4.5% alpha), 10 minute boil
  • 0.5 oz. Spalt Spalter hop pellets (3.0% alpha), 10 minute boil
  • 0.5 oz. Vanguard hop pellets (6.5% alpha), 10 minute boil
  • 1 oz. Crystal hop pellets (4.5% alpha), 10 minute whirlpool
  • 0.5 oz. Spalt Spalter hop pellets (3.0% alpha), 10 minute whirlpool
  • 0.5 oz. Vanguard hop pellets (6.5% alpha), 10 minute whirlpool
  • 2 pkg. Saflager Lager Yeast (W34/070)

Target Parameters

  • 1.046 s.g., 1.006 f.g., 5.2% abv, 3 SRM, 35 IBU, 5.25 gallon batch
  • Full volume step mash, with 40 minutes at 142°, 40 minutes at 156°, and 10 minutes at 168°; 70 minute boil
  • Claremont water with carbonates knocked out via lactic acid and Campden tablet to remove chloramines.

Procedure

  • While the 7.25 gallons of water were heating, I added 6 mL of 88% lactic acid to neutralize the carbonate load, in addition to adding a Campden tablet. No other minerals were added.
  • It took 29 minutes to heat up from tap water temperature (~115°) to 146° for the mash-in temperature. I also added 5 mL of 88% lactic acid (but realized I had the wrong settings, and this was probably too much). I hit an initial mash temperature of 142°, and held it there for 40 minutes. 10 minutes into the mash, I started recirculating. Then, I raised the temperature to 158°, which took around 20 minutes (I started at 75% power, and then upped it to 100% power for the last 10 minutes). To raise to 168° for mash-out, it took ~7 minutes at 100% power. To get boiling temperatures, it took around 50 minutes. I noted that it was boiling (bubbling) before the panel actually showed 212° (~207°).
  • The post-mash volume was 6.4 gallons, with a gravity of 1.043, for 72% mash efficiency.
  • I boiled for 70 minutes, adding hops and finings per the recipe.
  • After the boil, I chilled and transferred to the fermenter. In the fermenter, I continued the chill, down to 52°. Then, I pitched the yeast.
  • I brewed this beer on 17 October 2020, and it had a starting gravity of 1.049.
  • I raised the beer to 60° on 30 October 2020.
  • I lowered the beer to 55° on 1 November 2020, and down to 33° on 6 November 2020.
  • I kegged using semi-closed transfer on 30 November 2020.
  • Final gravity was 1.013, for 4.7% abv.

Tasting

  • Appearance
    • The beer pours with a persistent, thick, and white head–absolutely gorgeous! This is a true slow-pour beer. I am so pleased with the heading I’ve been getting from my pilsners. In the glass, the beer has a light gold color, with a very slight haze.
  • Aroma
    • Light grainy malt note, with a low level of spicy hop character. Very clean yeast character.
  • Flavor
    • Moderately low grainy-sweet malt character. The hops are more prominent, with a slight herbal character and clean bitterness that is pretty strong, almost approaching a level of harshness. Yeast flavor is very clean.
  • Mouthfeel
    • Moderate/moderate-low level of carbonation, due to the high head on the pour that drives off some of the CO2. The finish is off-dry, with a light and crisp body.
  • Would I brew this again?
    • Yes? I really need to take a look at my hopping levels, and perhaps consider going with American hops rather than European ones to get a better aroma. The persistent haze is annoying, but I also misjudged the lactic acid addition, which I suspect might be a factor, as well as the whirlpool. I’ll dial back the hops in my next batch and avoid the whirlpool, because this is more bitter than I really like for a pils. Once I’m buying RO water again, I’ll definitely be building up my water profile, rather than augmenting the rather over-mineralized tap water. So, there are things I like about the recipe, but I think I can continue to adjust for improvements.
  • Overall
    • 6/10

Brew Year’s Resolutions 2021

Posted on by

New Year, New Beer! I did fairly well in hitting most of my 2020 brewing resolutions, and I pushed my homebrew experience in some enjoyable new directions. This year is primarily about refinement–taking things I’ve done already, and working to perfect them or explore them in more detail.

  • Kveik.
    • I want to brew more with kveik. I had lots of fun exploring Hornindal from Omega, and will try out a few others this year, especially as the summer months hit. I’m particularly intrigued by Lutra and the concept of pseudo-lagers.
  • Pilsner.
    • I want to perfect my German pils recipes, especially with the local water. I’m feeling pretty good about the basics, but need to dial things down a bit in terms of bitterness and amp up the aroma and flavor aspects of hop character.
  • Big Beers in Small Batches.
    • I sometimes like sampling bigger beers, but I almost never want five gallons of them. As a result, I’ve done little brewing of many higher gravity styles, or more unusual styles. I aim to change this in 2021, with more 2.5 gallon batches. I’ve started a bit of this already (as mentioned in the December 2020 brew update)
  • Belgian Beers.
    • I like many Belgian beer styles, but I don’t love most of them enough to brew five gallons. As a corollary to the above resolution, I’m going to do some smaller batches of Belgian styles to explore that universe.

Blast from the Past: Gingerbread Winter Warmer 2016

Posted on by

Way, way, way back in the innocent days of September 2016, I brewed a winter warmer. At the time, it was okay, but nothing great. I drank much of it right from the keg, and the rest got bottled. I sampled some back in January 2018, and it was aging nicely. After that, I forgot about the beer for awhile, and only just ran across my stash in the basement while putting away Christmas decorations. Being New Year’s Eve and all, I thought it would be fun to pull out a bottle and give it a taste!

Although I was tempted to review my recipe and brewing notes prior to opening the bottle, I decided to go into the tasting with minimal expectations. I vaguely recalled that there was some ginger in there, but that’s about it. My spouse shared the bottle (it was 22 ounces of beer, and I didn’t need to drink all of it myself!), and we talked over the beer as watched the southern California sunset from our yard.

Tasting

  • Appearance
    • Very clear, deep amber beer, which pours with a moderately persistent cream-colored head.
  • Aroma
    • Raisins, light hint of leather, ginger, dried figs…very rich! No hop aroma noticeable.
  • Flavor
    • Malty, with moderate bitterness. Lots of pleasant notes from aging, including dried figs, raisins, and a touch of spice (ginger). Yeast character was surprisingly clean, with no unpleasant aspects that I was afraid might seep in after a few years.
  • Mouthfeel
    • Big body, very smooth, moderate carbonation.
  • Would I Age This Again?
    • YES. Although I don’t recall this being an exceptional beer four years ago, it sure is something special now. Everything has just come together in a rich, flavorful way, and I can’t think of a better beer to enjoy as we close out 2020. I’ll brew this again soon, to have at least a little aging under its belt before next New Year’s Eve.
  • Overall
    • 10/10
Here’s to cellared beer, and 2021!

Follow-Up: 2020’s Brew Year’s Resolutions

Posted on by

At the beginning of the past few years, I’ve set annual brewing goals. Now that we’re almost to the end of 2020, it seems like a good time to review my resolutions and see how it all went.

Alstadt Alt
  • Patience.
    • Recognizing that I often rushed my lagers into service quicker than is optimal, I planned my production so that each batch got a more extended lagering time. I did pretty well on this one. Most of my lagers got at least a month of cold conditioning before getting tapped, and in some cases even 5 or 6 weeks. I often felt another week or two of lagering might have been helpful, although the beers inevitably hit their full stride not long after going on tap. So, I count this one as a decent success.
    • Final Score: 7/10
  • Practice.
    • This was a two-part resolution.
      • Rebrew and perfect some favorites.
      • Explore North American “noble hops.”
        • I did pretty well here, also, with varieties like Crystal, Mt. Hood, Sterling, and others figuring prominently in my lagers and German ales (like the altbier depicted at right). Another succcess!
    • Final Score: 10/10
  • Prose.
    • At the start of 2020, I thought it might be fun to write another magazine article, or something similar. Then 2020 happened, and this one just had to go by the wayside. I got some good blogging in, but that’s about it.
    • Final Score: 2/10
  • Prost!
    • I had hoped to keep brewing fun…and, it really was. Even with everything else happening, brewing was a bright spot in my year. I couldn’t get together with friends in the same way, but I was able to arrange some socially distanced growler swaps for later enjoyment, and I got some good time in the early mornings while starting up brew sessions.
    • Final Score: 10/10