Category Archives: tastings

2021 IPA

Posted on by

This might be my least creative recipe name ever, but it sure is appropriate! Thanks to my HOPBOX, I had a whole mess of hops from the 2021 harvest. I wanted to craft a recipe that would highlight more “traditional” IPA flavors of citrus and pine, while also exploring some new-to-me varieties.

orange-gold beer with off-white head, held in tall tulip glass

After sorting through my hop selection, I selected Bravo as the main bittering hop, with heavy doses of Cashmere, Wai-iti, and Waimea in the whirlpool and dry hop. Each of those brought complementary notes of lemon, citrus, and pine, without major components of tropical fruits. When opening up the hops, I noted that Waimea had an incredible fruit aroma (and was my favorite), with Wai-iti being a close second. The Cashmere had a slightly dank aroma that verged on vegetal, so I wasn’t initially sure how I would like it in the brew. I built a moderately complex grist, in part to use up some malts and in part to give a robust malt backbone to the beer. Finally, I chose BRY-97 as the yeast. I haven’t brewed with it a ton (my early experiments found it to be veeery slooow to take off), but have heard enough great things that I wanted to give it a try.

2021 IPA

  • 10 lb. 6 oz. California Select 2-row malt (Great Western)
  • 2 lb. Maris Otter malt (Crisp)
  • 0.75 lb. Chateau Munich Light malt
  • 0.5 lb. Caramel 40° malt (Briess)
  • 0.25 lb. biscuit malt (BlackSwaen)
  • 1 oz. Bravo hop pellets (14.2% alpha), 60 minute boil
  • 1 Whirlfloc tablet, 5 minute boil
  • 1 oz. Cashmere hop pellets (7.0% alpha), 15 minute whirlpool
  • 1 oz. Wai-iti hop pellets (3.5% alpha), 15 minute whirlpool
  • 1 oz. Waimea hop pellets (13.2% alpha), 15 minute whirlpool
  • 2 pkg. American West Coast Ale yeast (Lallemand BRY-97)
  • oz. Cashmere hop pellets (7.0% alpha), 3 day dry hop in fermenter
  • 1 oz. Wai-iti hop pellets (3.5% alpha), 3 day dry hop in fermenter
  • 1 oz. Waimea hop pellets (13.2% alpha), 3 day dry hop in fermenter

Target Parameters

  • 1.062 o.g., 1.013 f.g., 6.5% abv, 63 IBU, 8 SRM
  • Full volume mash at 152° for 60 minutes, with 10 minute mash-out at 168°
  • Claremont tap water, adjusted with lactic acid to knock out carbonate in strike water. Adjusted further in kettle to reach target water profile of 61 ppm Ca, 16 ppm Mg, 91 ppm Na, 170 ppm SO4, 85 ppm Cl, 15 ppm HCO3; RA=-41 ppm.

Procedure

  • The night before brewing, I collected 7.5 gallons of tap water and treated it with 0.5 Campden tablet and 5.75 mL of 88% lactic acid, to knock out the carbonates. I let it sit overnight, before brewing the next morning.
  • I heated the water to 159°, and mashed in to hit a target temperature of 152°. I added 2.1 mL of 88% lactic acid, to adjust pH.
  • After recirculating at 152° for 60 minutes, I raised the temperature to 168° and held it there for 10 minutes before removing the grain basket.
  • In total, I collected 6.3 gallons of runnings with a gravity of 1.054, for 66% mash efficiency.
  • I brought the runnings to a boil, boiling for 30 minutes before adding the hops, to bring up the gravity a bit. As the boil started, I added 4 g of gypsum of 3 g of epsom salt to the boil, to hit the target water profile.
  • After the initial 30 minute boil, I added hops and finings per the recipe, reaching a 90 minute total boil.
  • Once I had finished the boil, I added the whirlpool hops and whirlpooled for 15 minutes before chilling down to 70° and transferring to the fermenter.
  • I pitched the yeast, and fermented at 66°.
  • I brewed the beer on 6 November 2021, and hit a starting gravity of 1.063.
  • On 14 November 2021, I added the dry hops to the fermenter in a bag, and let it sit at ambient temperature (~64°) for three days.
  • I kegged the beer on 17 November 2021. Within about a month, the beer had dropped completely clear.

Tasting

  • Appearance
    • This is a deep gold and very clear beer, with a persistent ivory head–gorgeous!
  • Aroma
    • Citrus peel and orange; not much in the way of detectable malt character, and the yeast character is very clean.
  • Flavor
    • The hops are at the forefront, with orange and citrus zest, followed by light pine. The malt character is smooth, but not over the top. I feel like a little bit of the hop character was lost between when I smelled the hops directly and now. Although I think it partly could be oxidation, I also suspect I should have either dry hopped more freely or else dry hopped in the keg, to get more exposure time. I bagged the hops for dry hopping, and don’t think they got as much contact as they should have.
  • Mouthfeel
    • Moderate body, with an off-dry finish and moderate carbonation level.
  • Would I Brew This Again?
    • Yes! I think I will modify my dry-hopping for next time, and dry hop a little longer or else leave the hops in the keg, or increase the amount of Waimea and Wai-iti.
  • Overall
    • 8/10

Ill-Tempered Gnome Clone

Posted on by

As I am pretty sure I’ve lamented previously, I sometimes get too far down the rabbit-hole of brewing to a particular style. IPA, stout, porter, pilsner…all are great, but that can be at expense of creativity. On the other hand, I grew wary of the big and bitter beers that I gravitated towards early in my craft beer days. And yet…I now find myself picking up a bottle of Arrogant Bastard every few weeks, and kind of enjoying it. The excesses of craft beer recipes are still excessive, but I’m finding that they can be enjoyable in moderation and on occasion.

dark brown beer with tan head, held in clear tulip glass against a white wall

To scratch this itch, I paged through the Craft Beer For the Homebrewer book, and my eyes settled upon a clone recipe for something called Ill-Tempered Gnome. Produced by Oakshire Brewing, this recipe looked big, dark, and bitter, and was billed as an American Brown Ale (on the website) or a winter warmer (in the beer book).

Quite intrigued, I pulled together the ingredients, making a minor substitution or two based on availability for some of the harder-to-find malts (e.g., I had to go with a different brand of coffee malt versus Franco-Belges Kiln Coffee Malt in the original recipe). That said, I did try to adhere as closely as possible to the book’s version, which I was told (by Denny Conn himself) came direct from the brewer.

Ill-Tempered Gnome Clone

  • 12 lb. California Select 2-row malt (Great Western)
  • 11 oz. crystal 15° (Great Western)
  • 5 oz. coffee malt (Simpsons)
  • 5 oz. honey malt (Gambrinus)
  • 5 oz. special B malt (Dingemans)
  • 4.5 oz. special roast malt (Briess)
  • 3.5 oz. chocolate malt (Briess)
  • 1 oz. Nugget hop pellets (12.9% alpha), 60 minute boil
  • 0.5 oz. Centennial hop pellets (8.1% alpha), 20 minute boil
  • 0.5 oz. Crystal hop pellets (4.5% alpha), 20 minute boil
  • 1 Whirlfloc tablet, 5 minute boil
  • 1 oz Cascade whole hops (est. 5.5% alpha), 5 minute boil
  • 2 pkg. Safale American ale yeast (US-05)

Target Parameters

  • 1.062 o.g., 1.015 f.g., 6.3% abv, 58 IBU, 19 SRM
  • Full volume mash at 154° for 60 minutes, with 10 minute mash-out at 168°
  • Claremont tap water, adjusted to reach estimated profile of 75 ppm Ca, 11 ppm Mg, 93 ppm Na, 149 ppm sulfate, 105 ppm Cl, 156 ppm bicarbonate; RA 68, 128 ppm alkalinity; 60 ppm effective hardness.

Procedure

  • I heated 7.5 gallons of water to 161°, adding a Campden tablet to remove chloramines. Then, I mashed in with the grains to hit a temperature of 154°. I added 7 mL (1.5 tsp.) of 88% lactic acid to adjust the pH of the mash, and recirculated at 154° for 60 minutes. Then, I raised the mash temperature to 168° and held it there for 10 minutes, before removing the grains.
  • In total, I collected 6.35 gallons of runnings with a gravity of 1.055, for 68% mash efficiency.
  • As I brought the runnings to a boil, I added 5 g of gypsum to adjust the water profile.
  • To bring the gravity up a bit, I boiled for an extra 10 minutes, before beginning to add the hops. I then boiled for an additional 60 minutes, adding hops and kettle finings per the recipe.
  • After the 60 minute boil, I chilled to ~75°, transferred to the fermenter, and chilled down to 65° in the fermentation chamber. Then, I pitched the two packages of yeast.
  • I brewed the beer on 9 October 2021, and fermented at 65°. Starting gravity was 1.061.
  • On 20 October 2021, I let the beer free rise to 70° (after removing it from the fermentation chamber).
  • I kegged the beer on 23 October 2021. At this point, its gravity was 1.017. This equates to 5.9% abv.

Tasting

  • Appearance
    • The beer pours with a thick and frothy ivory head, and awesome lacing as the head subsides slowly. The beer is a brilliantly clear reddish amber in color in a tulip glass, and is a nice even brown in a tall glass.
  • Aroma
    • Resiny hops are at the front, with toffee and coffee malt aroma alongside some caramel. The malt/hop balance is spot-on.
  • Flavor
    • Moderately high bitterness, with a resin and pine quality to the hops, for an extended bitterness in the finish. This beer has a full malt character, with caramel at the front and a slight bit of chocolate at the back. Delicious!
  • Mouthfeel
    • Medium-full body, with moderate carbonation and an off-dry finish.
  • Would I Brew This Again?
    • YES! The resiny hops plus rich malt character are an awesome combo. The beer is straight out of 1997 in terms of its traditional hops and big flavors, but I love it for that. Who knows if my version is a true clone, but do I really care? I love this beer! In particular, it’s not really a winter warmer (in terms of the overspiced recipes so common out there), but definitely closer to an American brown ale. I’ll do this one again.
  • Overall
    • 10/10

Farke’s Best Pils

Posted on by

My dad has a few hop bines on the farm in South Dakota, and usually has a fair bit of Cascade that he sends my way (see my recent pale ale). This year, I also managed to snag some South Dakota-grown versions of Saaz, Hallertauer, and Sterling, so a German pilsner seemed like an awesome use of them. I went with a super simple grist, and loaded up most of the hops towards the end in a hope to elevate relative flavor and aroma. I had to guess on alpha acid levels, so aimed a bit higher in estimated IBU in the presumption that they would be a bit lower in potential bitterness than is typical for the varieties.

Farke’s Best Pils

  • 10 lb. Viking Pilsner malt
  • 1 oz. Sterling whole hops (est. 7.4% alpha), 60 minute boil
  • 1 tsp. BruTanB, 10 minute boil
  • 1 Whirlfloc tablet, 5 minute boil
  • 1 oz. Hallertauer whole hops (est. 4.8% alpha), 5 minute boil
  • 1 oz. Saaz whole hops (est. 5.3% alpha), 5 minute boil
  • 1 tsp. yeast nutrient (WLN1000), 5 minute boil
  • 2 pkg. Saflager lager yeast (W34/70)

Target Parameters

pale yellow beer with white foam held aloft in tall clear glass
  • 1.046 o.g., 1.009 f.g., 4.9% abv, 32 IBU, 4 SRM
  • Full volume mash at 149° for 60 minutes, with 10 minute mash-out at 168°
  • Water built up from RO water, to hit target of 59 Ca, 8 Mg, 89 SO4, 63 ppm Cl, RA=-47

Procedure

  • I added 2.8 g gypsum, 2.3 g epsom salt, and 3.6 g CaCl in 7.25 gallons of water to hit a profile of 59 Ca, 8 Mg, 89 SO4, and 63 ppm Cl, with RA=-47.
  • I heated the water to 154° and mashed in to hit a temperature of 149°. At this point, I added 0.7 mL (approximately) of 88% lactic acid, to hit the target mash pH of 5.3 to 5.4.
  • I mashed at 149° for 60 minutes (with recirculation), before raising the temperature to 168° and holding it there for 10 minutes.
  • After the mash, I removed the grains. In total, I collected 6.5 gallons of runnings with a gravity of 1.041, for 70% mash efficiency.
  • I brought the runnings to a boil, adding finings per the recipe. After 60 minutes, I chilled to 78°, let settle for 90 minutes, and then transferred to the fermenter. I chilled it down the rest of the way to 50° in the fermentation chamber, before pitching the yeast.
  • Starting gravity was 1.046. I brewed the beer on 18 September 2021.
  • After starting fermentation at 50° on 18 September 2021, there were active signs of bubbling by 20 September 2021. I raised the temperature to 53° on that day, and then up to 56° on 22 September 2021, and 60° on 30 September. I dropped it to 55° on 3 October, 50° on 4 October, 45° on 5 October, 40° on 6 October, 35° on 7 October, and to 32° on 9 October.
  • I kegged the beer on 11 October 2021. There was a gorgeous and delicate malt flavor at that time, with a really nice floral hop character, and moderately low level of bitterness. This was shaping up to be a nice beer!
  • Final gravity was 1.010, for 4.7% abv.

Tasting

  • Appearance
    • Light yellow, very clear (nearly brilliant), with a fairly persistent white head
  • Aroma
    • Delicate malt aroma with a grainy character and light honey-sweet quality. A very low floral hop aroma. Very nice and clean fermentation character!
  • Flavor
    • Light malty character, slightly sweet, with a clean fermentation character. The bitterness is clean and moderate, but not overly so. There is a nice balance between hops and malt!
  • Mouthfeel
    • Medium body and moderate carbonation, with an off-dry finish.
  • Would I Brew This Again?
    • The malt aroma is amazing, but I wish there was a little more hop aroma alongside that in the final product. The bitterness level is perfect, and it dodges some of the issues I have had with overbittering in past recipes. The body could be a touch lighter. That said, I’m very happy with how clean the fermentation turned out, and the water character is great, too! Overall, this is not an amazing beer, but still a pretty good one.
  • Overall
    • 7/10

Humboldt’s Lesser Hefeweizen

Posted on by

I enjoy German hefeweizens, but just don’t brew them that often. So, I decided it was time to do a rebrew of a recipe from last year. Because I was using up some grains, I ended up with a slightly smaller beer. Hence, the name change from Humboldt’s Hefeweizen to Humboldt’s Lesser Hefeweizen. Additionally, I decided to try out a dry wheat beer strain from Lallemand, just to see how it compares with the liquid varieties available.

Humboldt’s Lesser Hefeweizen

  • 4 lb. 10 oz. Viking Pilsner Zero malt
  • 4 lb. 1 oz. Viking wheat malt
  • 2 oz. melanoidin malt (Weyermann)
  • 8 oz. rice hulls
  • 0.4 oz. Vanguard hop pellets (6.5% alpha), 60 minute boil
  • 1 tsp. yeast nutrient (White Labs WLN1000), 5 minute boil
  • 1 pkg. Munich Classic Wheat Beer (Lallemand)

Target Parameters

  • 1.043 o.g., 1.010 f.g., 4.3% abv, 10 IBU, 4 SRM
  • Full volume mash at 149° for 60 minutes, with 10 minute mash-out at 168°
  • Water built up from RO water, to hit target of 43 ppm Ca, 76 ppm Cl, RA=-30 ppm

Procedure

  • I built up my water starting with RO water and 4 g of calcium chloride, to hit 43 ppm Ca and 76 ppm Cl. I then heated this to 158° before mashing in, to hit a target mash rest of 149°. I added 2 mL of 88% lactic acid, to adjust pH.
  • I held the mash (with recirculation) at 149° for 60 minutes, before raising to 168° for 10 minutes. Then, I removed the grain basket and brought the runnings to a boil.
  • In total, I collected 6.4 gallons of runnings with a gravity of 1.036, for 68% mash efficiency.
  • I boiled for 30 minutes before adding the hops, to drive down the volume of the beer and increase the gravity a bit.
  • I added hops and yeast nutrient per the recipe. After the 30 minutes of initial boil and 60 minutes of boiling with the hops, I turned off the heat and chilled the wort down to 78° before transferring to the fermenter.
  • After chilling the wort down to 64° in the fermentation chamber, I pitched the yeast and set it to ferment at 65°.
  • I brewed the beer on 25 September 2021. Starting gravity was 1.041.
  • Active fermentation was well underway by the next day. I raised the fermentation temperature to 70° by 3 October 2021, and kegged the beer on 8 October 2021.
  • Final gravity was 1.012, for 3.9% abv.

Tasting

  • Appearance
    • Very hazy, straw colored beer that pours with a creamy and persistent white head.
  • Aroma
    • Tart aroma, moderately low levels of spicy phenolics; no banana or bubblegum aroma. No hop aroma.
  • Flavor
    • Bready malt character that is really pleasant. There is a slight tartness to the yeast character, and a bit of fruitiness along with that. There is not much for banana or bubblegum or spice. Bittering level is low, with no real distinct character to speak of.
  • Mouthfeel
    • High level of carbonation, but not overly so. Medium light body, and a smooth finish.
  • Would I brew this again?
    • This isn’t a bad beer, but it is missing the yeast character I like in a good German hefeweizen. I fermented this at a somewhat low temperature (~65°). Some recommendations for this yeast strain have suggested that temperature is desirable to avoid a case of the bubblegums, but I feel that in this case much of the yeast character was lost. There was no banana, and little clove, and just a general moderate level of fruitiness. I would definitely ferment this higher next time, at least with the particular dry yeast strain! In fact, I would probably just find a different yeast, and go back to the liquid White Labs (or equivalent).
  • Overall
    • 6/10

Turtle Toe Porter

Posted on by

As the weather swings cooler, my tastes swing to darker beers–porters, stouts, and such. So, I found a clone recipe for Deschutes Black Butte Porter on the AHA website and made a few modifications for yeast (American ale instead of English ale) and hops (to use up on-hand varieties).

The name comes from a fossil specimen in the museum lab at the moment–it’s a ~67 million year old turtle from Wyoming, which unexpectedly had complete hands and feet. “Turtle Toe Porter” is a very alliterative title for a beer, so the name stuck!

beer label image, showing foot skeleton of turtle on left side, text saying "Turtle Toe Porter" on right side, and "Farke Brewing, Claremont, California" at the bottom.
(bone image from Williston’s 1925 Osteology of the Reptiles)

Turtle Toe Porter

  • 9.5 lb. California Select 2-row malt (Great Western)
  • 14 oz. chocolate wheat malt (Weyermann)
  • 10 oz. 80L crystal malt (Warminster)
  • 4 oz. carapils malt (Briess)
  • 0.75 oz. Magnum hop pellets (10.1% alpha), 90 minute boil
  • 1 oz. Cascade whole hops (5.5% alpha), 10 minute boil
  • 0.5 oz. Mt. Hood hop pellets (8.0% alpha), 5 minute boil
  • 1 Whirlfloc tablet, 5 minute boil
  • 1 pkg. US-05 American ale yeast (DCL/Fermentis)

Target Parameters

  • 1.050 s.g., 1.011 f.g., 5.2% abv, 39 IBU, 30 SRM
  • Full volume mash at 152° for 60 minutes, with 10 minute mash-out at 168°
  • Claremont tap water, treated with Campden tablet

Procedure

  • I mashed in with 7.5 gallons of water heated to 157°, to hit a target mash temperature of 152°. I added 5 mL of 88% lactic acid to bring down the mash pH. I recirculated the mash at this temperature for 60 minutes, before raising the mash to 168°. Then, I removed the grains and brought the runnings to a boil.
  • In total, I collected 6.4 gallons of runnings with a gravity of 1.044, for 69% mash efficiency.
  • I brought the kettle to a boil, adding hops and finings per the recipe. After a 90 minute boil, I turned off the heat and chilled to ~80°, before transferring to the fermenter. I chilled the wort the rest of the way in the fermentation chamber, before pitching the yeast.
  • I brewed this beer on 11 September 2021. Starting gravity was 1.051, and I fermented it at 66°.
  • On 18 September 2021, I pulled the beer out to ambient, around 70° to 72°, to finish out fermentation.
  • I kegged the beer on 24 September 2021. Final gravity was 1.014, which works out to 4.9% abv.

Tasting

  • Appearance
    • Brilliantly clear, deep brown beer with garnet highlights, that pours with a decently persistent tan head.
  • Aroma
    • Roasty aroma of coffee and chocolate at the front. No significant hop or yeast character evident.
  • Flavor
    • Roasty and cocoa notes dominate, with a touch of dark caramel behind that. The base malt profile has a slightly grainy character. Bitterness is moderate and fairly clean, with perhaps a slight woody character.
  • Mouthfeel
    • Medium body, moderate carbonation, dry finish.
  • Would I brew this again?
    • Yes! This is exactly the American porter that I wanted. It is flavorful, yet very drinkable. I like the roasted character in it, and it is a good beer to bridge the summer to fall transition. If brewed as a winter beer, I might add a bit more character by using Maris Otter, but that’s a fairly mild critique in the scheme of things.
  • Overall
    • 10/10