Tag Archives: wheat beer

2022 Orange Summer Wheat Ale

Posted on by
Reply

This was a quick brew to serve at a homebrew festival…I roughly followed past recipes, and used zest from 5 Valencia oranges soaked in 4 oz. of vodka for the orange flavoring (added at kegging). It was my first brew back on my batch sparge system (while my Anvil Foundry was temporarily down). I had some major efficiency issues–I suspect maybe a poor crush for the grains–and thus had to improvise heavily with extract. The brew definitely didn’t go as planned, but at least it got done. My subsequent brews in the old mash tun went much better, thank goodness, and now I’m back on the Foundry!

2022 Orange Summer Wheat Ale

  • 6.5 lb. red wheat malt
  • 3.25 lb. 2-row pale malt
  • 6 oz. Viking dextrin malt
  • 8 oz. rice hulls
  • 0.8 oz. Sterling hop pellets (7.5% alpha), 60 minute boil
  • 1 tsp. WLN1000 yeast nutrient (White Labs)
  • 1 pkg. German Ale Yeast (SafAle K97)

Target Parameters

  • 1.043 s.g., 1.011 f.g., 4.3% abv, 21 IBU, 4 SRM
  • Full volume mash, no sparge, 152°
  • Claremont tap water, Campden tablet added to remove chloramines

Procedure

  • I added 8 gallons of water to the mash tun, letting it settle to 157° before adding the grains and 8 mL of 88% lactic acid to adjust pH. The mash settled around 152° initially, and I let it sit for 75 minutes before vorlaufing and collecting the runnings.
  • In total, I collected 6.3 gallons of runnings with a gravity of 1.027, for barely 45% mash efficiency. This is some of the worst efficiency I have ever had, and I’m not sure why. I suspect either I had a poor crush with the high volume of wheat malt, or perhaps the wheat malt didn’t have the enzyme potential expected (which doesn’t make complete sense to me), or some other factor. In any case, I had to improvise major-time and add 1.5 lb. of extra light Briess DME to bring the gravity into a tolerable range.
  • I brought the runnings to a boil, boiling for 60 minutes and adding hops and finings per the recipe. After 60 minutes, I turned off the flame and chilled down to ~70° before transferring to the fermenter.
  • I brewed this beer on 10 April 2022. Starting gravity was 1.044. Once I pitched the yeast, I fermented at ~65°.
  • Prior to brew day, I zested 5 fresh-picked Valencia oranges and put the rind into a 4 oz. bottle topped up with vodka. On kegging day, I strained out the zest.
  • I kegged the beer on 23 April 2022, and added the orange tincture at that point.
  • Final gravity was 1.010, for 4.5% abv.
  • I force carbonated, and it was served at a beer festival on April 30. I couldn’t attend, and got the keg back. Two weeks later, I transferred to a pinlock keg for serving. I didn’t have my usual ball lock quick disconnect handy, so I had to do the less-than-desirable task of transferring directly into the keg and then purging it with CO2 via the pressure relief valve.

Tasting

  • Appearance
    • The beer is cloudy and a sort of muddy reddish orange color. The head is white and persistent.
  • Aroma
    • A fairly pleasant orange and orange blossom aroma is prominent, but not much else.
  • Flavor
    • Orange and doughy malt flavors, with a moderate level of bitterness.
  • Mouthfeel
    • Light body, moderate carbonation, dry finish. There is a somewhat unpleasant astringency on the finish.
  • Would I Brew This Again?
    • This was a very disappointing version of my normally likable orange wheat ale. The orange character is nice, and K97 is an awesome American wheat ale yeast, but the astringency and muddy coloration keep this from being a winner. So many things went sideways on this brew that I have no doubt my next iteration will be far superior. All blame goes to technique flaws, not the recipe itself. This batch is not a complete dumper, but it comes very close.
  • Overall
    • 3/10

Humboldt’s Lesser Hefeweizen

Posted on by

I enjoy German hefeweizens, but just don’t brew them that often. So, I decided it was time to do a rebrew of a recipe from last year. Because I was using up some grains, I ended up with a slightly smaller beer. Hence, the name change from Humboldt’s Hefeweizen to Humboldt’s Lesser Hefeweizen. Additionally, I decided to try out a dry wheat beer strain from Lallemand, just to see how it compares with the liquid varieties available.

Humboldt’s Lesser Hefeweizen

  • 4 lb. 10 oz. Viking Pilsner Zero malt
  • 4 lb. 1 oz. Viking wheat malt
  • 2 oz. melanoidin malt (Weyermann)
  • 8 oz. rice hulls
  • 0.4 oz. Vanguard hop pellets (6.5% alpha), 60 minute boil
  • 1 tsp. yeast nutrient (White Labs WLN1000), 5 minute boil
  • 1 pkg. Munich Classic Wheat Beer (Lallemand)

Target Parameters

  • 1.043 o.g., 1.010 f.g., 4.3% abv, 10 IBU, 4 SRM
  • Full volume mash at 149° for 60 minutes, with 10 minute mash-out at 168°
  • Water built up from RO water, to hit target of 43 ppm Ca, 76 ppm Cl, RA=-30 ppm

Procedure

  • I built up my water starting with RO water and 4 g of calcium chloride, to hit 43 ppm Ca and 76 ppm Cl. I then heated this to 158° before mashing in, to hit a target mash rest of 149°. I added 2 mL of 88% lactic acid, to adjust pH.
  • I held the mash (with recirculation) at 149° for 60 minutes, before raising to 168° for 10 minutes. Then, I removed the grain basket and brought the runnings to a boil.
  • In total, I collected 6.4 gallons of runnings with a gravity of 1.036, for 68% mash efficiency.
  • I boiled for 30 minutes before adding the hops, to drive down the volume of the beer and increase the gravity a bit.
  • I added hops and yeast nutrient per the recipe. After the 30 minutes of initial boil and 60 minutes of boiling with the hops, I turned off the heat and chilled the wort down to 78° before transferring to the fermenter.
  • After chilling the wort down to 64° in the fermentation chamber, I pitched the yeast and set it to ferment at 65°.
  • I brewed the beer on 25 September 2021. Starting gravity was 1.041.
  • Active fermentation was well underway by the next day. I raised the fermentation temperature to 70° by 3 October 2021, and kegged the beer on 8 October 2021.
  • Final gravity was 1.012, for 3.9% abv.

Tasting

  • Appearance
    • Very hazy, straw colored beer that pours with a creamy and persistent white head.
  • Aroma
    • Tart aroma, moderately low levels of spicy phenolics; no banana or bubblegum aroma. No hop aroma.
  • Flavor
    • Bready malt character that is really pleasant. There is a slight tartness to the yeast character, and a bit of fruitiness along with that. There is not much for banana or bubblegum or spice. Bittering level is low, with no real distinct character to speak of.
  • Mouthfeel
    • High level of carbonation, but not overly so. Medium light body, and a smooth finish.
  • Would I brew this again?
    • This isn’t a bad beer, but it is missing the yeast character I like in a good German hefeweizen. I fermented this at a somewhat low temperature (~65°). Some recommendations for this yeast strain have suggested that temperature is desirable to avoid a case of the bubblegums, but I feel that in this case much of the yeast character was lost. There was no banana, and little clove, and just a general moderate level of fruitiness. I would definitely ferment this higher next time, at least with the particular dry yeast strain! In fact, I would probably just find a different yeast, and go back to the liquid White Labs (or equivalent).
  • Overall
    • 6/10

Humboldt’s Hefeweizen

Posted on by

It has been a loooooong time since I’ve brewed a German hefeweizen / weissbier. In fact, my records show that I’ve only done it once, over five years ago. That attempt was all-extract, and turned out reasonably well.

Alexander von Humboldt, from a portrait by Joseph Karl Stieler

I’ve been thinking about this style because I wanted something that turns around quickly, has a ton of character, and is low alcohol enough to be enjoyed as a session beer on warm days. Plus, I’ve really been into German styles lately–what’s not to like?

The recipe more or less follows Gordon Strong’s weissbier recipe from the March/April 2020 issue of Brew Your Own magazine (recipe here, behind paywall). I liked its simplicity, and that it could be done fairly well with an infusion step mash. I added in a touch of melanoidin malt, to use up a lingering handful, and used up some extra wheat malt, too. The recipe called for a ferulic acid rest (to maximize clove character), and I was willing to give that a try in the interest of science.

The name–Humboldt’s Hefeweizen–honors German scientist Alexander von Humboldt. I recently finished a biography about him (Andrea Wulf’s Invention of Nature–highly recommended!), and I was fascinated by his intellectual and cultural influence, as well as his incredible dedication to documenting knowledge. This dude has a ton of animals and plants bearing his name, bestowed by the scientific community. There’s a Humboldt Penguin, and a Humboldt Squid, and a Humboldt’s Sapphire Hummingbird. Why not a Humboldt’s Hefeweizen? I don’t know that he necessarily drank much of the stuff when he was alive, but he probably didn’t eat many penguins, either.

Humboldt’s Hefeweizen

  • 4.75 lb. Superior Pilsen Malt (Great Western)
  • 4 lb. white wheat malt (Briess)
  • 1.25 lb. white wheat malt (Great Western)
  • 1.6 oz. melanoidin malt (Weyermann)
  • 0.25 oz. Magnum hop pellets (13.2% alpha), 60 minute boil
  • 1 pkg. Hefeweizen Ale yeast (WLP300, White Labs)

Target Parameters

  • 1.047 o.g., 1.010 f.g., 4.9% abv, 11 IBU, 4 SRM
  • Infusion mash; 15 minute acid rest at 116°; 30 minute saccharification rest at 149°; 30 minute saccharification rest at 158°, batch sparge
  • Claremont tap water with mineral additions, to hit target water profile of 80 ppm Ca, 9 ppm Mg, 23 ppm Na, 58 ppm SO4, 50 ppm Cl, 220 ppm HCO3; RA=118 pm

Procedure

  • The night before brewing, I spooled up a 1.25L starter for the yeast.
  • On brew day, I mashed in with 2 gallons of water at 129°, to hit 119° for the acid rest. This is a touch higher than I wanted, but still within the acceptable parameters for an acid rest.
  • After 15 minutes, I added 1.6 gallons of water at 202°, to hit a 149° mash temperature. I added 4.5 mL of lactic acid at this time, and let it rest for 30 minutes.
  • Next, I added 1.6 gallons of water at 185°, to raise the mash temperature to 152°. I had been hoping for a little warmer (158°), but will settle for this. After 30 minutes, I collected the first runnings.
  • I added 3.6 gallons of water at 185°, let it rest for 10 minutes, and collected the second runnings.
  • In total, I collected 7.2 gallons of runnings with a gravity of 1.040, for 75% mash efficiency.
  • I brought the runnings to a boil, adding the hops per the schedule. After 60 minutes, I turned off the flame and began chilling.
  • I transferred the wort into the fermenter, and chilled it further in my fermentation chamber. Once I hit 62°, I pitched the yeast.
  • I brewed this beer on 26 April 2020, and kept the 62° temperature for the first four days of fermentation. I ramped up to 67° on 30 April.
  • On 3 May 2020, I brought the beer out to ambient temperature, which was around 72°, to finish out fermentation.
  • I kegged the beer on 5 May 2020, adding 3.61 oz. of corn sugar. This should hit a target carbonation volume of ~3.4 volumes. After a week, I hooked it up to the gas in my keezer, carbonating the last little bit in there.
  • Starting gravity was 1.045, and final gravity was 1.013, for 4.3% abv.
yellow beer with fluffy white head, in weizen glass with SVP2014 on front with picture of fossil Archaeopteryx, held by hand in green yard

Tasting

  • Appearance
    • Creamy white head, persistent; doesn’t always pour consistently tall, though (gotta work on the head factor). I seem to do better if I let the beer line rest for 10 minutes between pours, to let CO2 out of solution and encourage some foam. Very hazy light gold beer.
  • Aroma
    • Tart aroma, with light bubblegum and clove. (no banana) Lots of yeast character!
  • Flavor
    • Light and smooth, with very low, subtle hop flavor. Slightly tart, with a mild bite coming from high level of carbonation that offsets the malt. Moderate clove, slight banana, very slight bubblegum in the yeast character. Malt character is light and somewhat bready, with a residual sweetness.
  • Mouthfeel
    • Medium-light body, creamy on tongue, with high carbonation, very slightly dry finish.
  • Would I brew this again?
    • This is a really nice weissbier! I think the freshness, malt balance, and high carbonation come together pretty well. I like that I dodged the super-banana (sometimes to the level of stomach-churning) character of wheat beers fermented at higher temperatures, so there’s not much I would change on that end. The yeast character is pretty nice here, too. My one disappointment concerns the level of head; depending on my pour (and how long the beer has sat in the lines between pours, with a greater length of time encouraging more foam), I don’t get quite as tall of a head as consistently as I would like. I wonder if the low temperature initial mash rest had a detrimental effect in this regard (in terms of breaking down the relevant proteins just a bit too much). Or maybe it’s how I’m pouring? Or maybe I am expecting more head than is realistic in a typical setting? I might add in a touch of flaked wheat to address head character next time.
    • As a style, I’m definitely coming back to this one. It’s super flavorful, packing in a ton of character without a ton of alcohol. That’s perfect for enjoying on a summer afternoon!
  • Overall
    • 8.5/10

Schoepshead Pale Schöps

Posted on by

For our April style competition, my homebrew club decided to try a Breslau-Style Pale Schöps. I had never heard of this until my club president brought this up as an option, and a bit of searching online finds virtually nothing. This is a historical style, native to the area of Breslau (now Wrocław, Poland). The Brewer’s Association added it to their style guide for the GABF a few years back, which I can only imagine must have been a special favor for someone, because there just ain’t any commercial examples out there now.

In any case, I only found a handful of recipes online, and many (all?) of these were by people asking, “So, I made up this recipe and does it look plausible…” This meant I decided to just use what I’ve learned over the years, and try and put my own recipe together.

From what I read about the style, it should be mostly wheat malt in the grist (up to 80%), with a bready flavor and aroma aspect and a full body. Although this is a wheat ale, it wasn’t supposed to have German wheat ale yeast–instead, a fruity character was described, without phenols. Hops are in the background on this, too.

With all of this information, I put together a grain bill that was mostly wheat malt (~70%), backed up by equal parts pilsner and biscuit malt. I elected to go with a German ale yeast, the classic WLP029. For my grains, I wanted to go with European malts, choosing those from Viking because at least some are sourced from Poland. This seemed appropriate for the brew! I had no idea if I would like this batch or not, so I aimed for 3 gallons instead of the full 5.

The name is a German-ish (highly inauthentic and untranslatable) pun on “Sheep’s Head,” just because I thought it sounded funny and vaguely like the word “Schöps.”

Schoepshead Pale Schöps

  • 6 lb. wheat malt (Viking)
  • 1 lb. biscuit malt (Dingemans)
  • 1 lb. pilsner malt (Viking)
  • 1 lb. rice hulls
  • 2 oz. Hallertauer Mittelfrueh hop pellets (2.7% alpha), 35 minute boil
  • 1 Whirlfloc tablet, 10 minute boil
  • 1 tsp. Fremax yeast nutrient, 10 minute boil
  • 1 pkg. German Ale/Kolsch yeast (White Labs, WLP029)

Target Parameters

  • 60 minute infusion mash, 153°, batch sparge
  • 1.065 o.g., 1.016 f.g., 6.6% abv, 24 IBU, 8 SRM
  • Claremont tap water

Procedure

  • 48 hours in advance, I made a 0.65L starter with the yeast, and cold crashed for 24 hours.
  • I mashed in with 3.25 gallons of water at 165°, to hit a 154° mash temperature. I let this sit for 60 minutes, and it was down to 151° by the end. I added 0.3 gallons of water at 185°, let sit for 10 minutes, vorlaufed, and collected first runnings.
  • Then, I added 2.25 gallons of water at 185°, let sit for 10 minutes, vorlaufed, and collected the second runnings.
  • In total, I collected 4.3 gallons of runnings at a gravity of 1.047. This was only 67% efficiency; it put me well below my target (1.053), but it’s not a surprise given the large amount of wheat in the bill.
  • I boiled for 60 minutes, adding hops and yeast nutrient per the schedule. After 60 minutes, I chilled the wort and transferred to the fermenter.
  • I brewed this beer on March 30, with a starting gravity of 1.060. I fermented the beer a 68°, and gravity was down to 1.014 by 2 April. On 9 April, gravity was 1.010. I kegged the beer at this point; it had reached 6.6% abv.

Tasting

  • Aroma
    • Very bready, with a slight fruitiness behind that. No hop aroma.
  • Appearance
    • Persistent white and very fine head. Beer itself is copper color, with a decent amount of haze.
  • Flavor
    • Lightly fruity on the front, with a nice rounded bready, malty flavor behind that. Hop bitterness is medium-low, with a nice smooth finish.
  • Mouthfeel
    • Great body on this, with moderately high carbonation. The finish is nice and extended, pleasantly balancing the malt and hops.
  • Would I brew this again?
    • This is a really nice beer! I could see myself brewing this recipe again….I wasn’t sure how I’d like this, and it has turned into a pretty enjoyable brew. The flavor is really nice, and it’s a highly drinkable style for its level of alcohol. It’s a great bridge between the beers of winter and the beers of summer. I can’t say there’s anything I’d really change, either to keep it more to style or to make it more to my palate.
  • Overall
    • 10/10

And…the beer won first place in our club competition!

The Ones That Got Away…

Posted on by

For a variety of reasons, I haven’t been able to blog about every single batch I brewed in 2018. Many of the ones that didn’t make the cut were repeat brewings of successful recipes. Because I’m not likely to get all of them with full blog posts at this stage, I’m giving myself semi-amnesty by listing them with brief comments.

  • Cerveza de Jamaica 1.1
    • This was a rebrew of the first version, which I really liked. Version 1.1 was modified very slightly to add a little more hibiscus and a little more orange peel, and the result was an incredibly tasty beer!
  • Double IPA / Hoppy Blonde Ale
    • This was an experiment with parti-gyle techniques, co-brewed with a friend. The double IPA ended up at around 7.8% abv, and was fairly tasty. The blonde ale rounded out at 4.6% abv, and was also pretty nice. The experiment was a lot of work on brew day, but a fun attempt.
  • Raspberry Belgian 2018
    • I rebrewed a house favorite recipe for a beer festival, and thus didn’t really get to taste the final result (sadly). Everything on the process was tasty, though, so I’ll be doing this one again too.
  • Bavarica Session IPA
    • This one was pretty disastrous! The flavors clashed horribly (never again will I use Munich malt in a session IPA), and I dumped most of the batch.
  • Grab Bag IPA
    • Basically to use up a bunch of ingredients. Nothing memorable here, although it was pretty drinkable.
  • Grapefruit Wheat Ale
    • I don’t have many notes on this, other than that I used Amoretti grapefruit craft puree for some of the flavoring.