Continuing my journey through the world of lagers, I decided to try a new version of a Pre-Prohibition lager. I’ve made something from this style range before, during my first foray into lagers, and it turned out pretty well. For the current batch, I used a blend of pilsner and 2-row malt to achieve a bit of complexity, layering in some flaked corn to give the “American” component. I got some Triumph hops in a HOPBOX selection, and thought this would be well suited for my American lager. Triumph is an American hop with European parentage, including some noble hops, and it is supposed to bring some noble characteristics along with delicate fruit qualities.
- 6.5 lb. Pilsner Malt (Viking)
- 4 lb. 2-row malt (Rahr)
- 1 lb. flaked corn
- 0.25 lb. rice hulls
- 0.5 oz. Triumph hop pellets (7.9% alpha), 60 minute boil
- 0.75 oz. Triumph hop pellets (7.9% alpha), 15 minute boil
- 1 tsp. BruTahB, 10 minute boil
- 1 Whirlfloc tablet, 5 minute boil
- 0.75 oz. Triumph hop pellets (7.9% alpha), 5 minute boil
- 2 pkg. Diamond lager yeast (Lallemand)
- 1.051 s.g., 1.008 f.g., 28 IBU, 5.7% abv, 4 SRM
- Full volume Hochhurz mash, 45 minutes at 144°, 45 minutes at 10 minutes at 160°, 10 minute mash-out at 168°
- Water built from scratch to hit 59 ppm Ca, 8 ppm Mg, 89 pm SO4, 63 ppm Cl, -47 ppm RA
- I added 2.7 g gypsum, 2.2 g epsom salt, and 3.4 g calcium chloride to 7 gallons of RO water, to hit a target of 59 ppm Ca, 8 ppm Mg, 89 pm SO4, 63 ppm Cl, and -47 ppm RA.
- I heated the water in the Foundry to 150°, and added the grains to hit a mash temperature of 144°. I added 1.5 mL of 88% lactic acid to adjust pH slightly. I held the mash at 144° with recirculation for 45 minutes, and then raised the temperature to 160°, holding it here for 45 minutes also. Finally, I raised the mash to 168° and held it here for a 10 minute mash-out.
- After the mash-out, I removed the grain basket and brought the runnings to a boil. I collected 6.3 gallons of runnings with a gravity of 1.048, for 71% mash efficiency.
- I brought the beer to a boil, aiming for 60 minutes, adding hops and such per the recipe. My Foundry had an issue mid-boil (the power switch was starting to burn out),so it took a bit of work to limp the boil through to the end. I adjusted the length of the boil time slightly to compensate.
- After approximately 60 minutes of total boil, I turned off the heat and chilled to ~68°, before transferring to the fermenter and chilling down to 48° in the fermentation chamber. I then pitched the yeast.
- I brewed the beer on 14 February 2022, and fermented at 52°. Starting gravity was 1.053.
- I kegged the beer on 8 April 2022. Final gravity was 1.013, for 5.3% abv.
- Brilliantly clear, light yellow beer with moderately persistent head. The head pours fairly thick, but thins out after awhile.
- Clean! Slight grainy/corn profile; not much hop character, although there is a bit of a spice hop note.
- Malty/grainy, with light corn flavor; moderately high bitterness, but not much for hop character otherwise.
- Fairly crisp finish, with moderate carbonation. Medium body. Very smooth drinking!
- Would I brew this again?
- YES! This is a nice version of the style; I suppose it doesn’t hit all of the BJCP style notes, but it really is a pretty awesome American lager. A touch more hop aroma would be nice, but not mandatory.