Tag Archives: CPA

Cascade Pale Ale II

Posted on by

American pale ales are one of my favorite styles, if only because there are so many interpretations. You can get the classic almost-amber, slightly caramel versions with Cascade and other “legacy” hops, or you can get the fairly dry, almost IPA, pale and tropical hop versions loaded down with Mosaic and the latest fad hop, or any other number of versions in between. I love Sierra Nevada’s pale ale–it is such a consistently enjoyable and reliable beer, and also easy to find. For my next pale ale, I didn’t want a clone of Sierra Nevada, but I did want something in that general flavor sphere.

I turned to Brewing Classic Styles, which has two pale ale recipes. One is a bit drier and lighter in malt, and the other throws in some extra crystal malt and a bit of Munich malt to up the body and dark the color. I chose the latter version, but made some slight modifications. First, I used Maris Otter instead of American two-row as the base…I thought it would provide an even maltier backbone. Because I just got a shipment of this season’s Cascade hops from my dad in South Dakota, I used Cascade only for the late hop and dry hop regimens. Details are below!

Cascade Pale Ale II

  • 10 lb. Maris Otter malt (Crisp)
  • 0.75 lb. Munich Light (Chateau)
  • 0.75 lb. caramel 40 (Briess)
  • 1 oz. Magnum hop pellets (10.1% alpha), 60 minute boil
  • 1 oz. Cascade whole hops (est. 5.5% alpha), 10 minute boil
  • 1 Whirlfloc tablet, 10 minute boil
  • 1 pkg. Safale American Ale Yeast (US-05)
  • 2 oz. Cascade whole hops (est. 5.5% alpha), dry hop in keg

Target Parameters

  • 1.052 o.g., 1.011 f.g., 5.4% abv, 42 IBU, 8 SRM
  • Full volume mash at 152° for 60 minutes, with 10 minute mash-out at 168°
  • Claremont tap water adjusted with gypsum to hit water profile target of 102 Ca, 11Mg, 93 Na, 203 sulfate, 105 Cl, 156 bicarbonate, 49 RA, 128 alkalinity

Procedure

  • I mashed in with 7.3 gallons of water at 158°, to hit a mash temperature of 152°. I added 7 mL of 88% lactic acid as a pH adjustment, and recirculated the mash at 152° for 60 minutes.
  • Next, I raised the mash temperature to 168°, held it there for 10 minutes, and then removed the grains.
  • I collected 6.2 gallons of runnings at a gravity of 1.047, for 68% mash efficiency.
  • At this point, I added 2 tsp. of gypsum and brought the runnings to a boil. I added the hops and other ingredients per the recipe, boiling for 60 minutes.
  • After 60 minutes, I turned off the heat and chilled the wort to 80°. Next, I transferred it to the fermenter, and chilled to 66° in my fermentation chamber, before pitching the yeast.
  • My original gravity was 1.052–exactly on the mark! I brewed the beer on 4 September 2021, and fermented at 66°.
  • On 11 September 2021, I pulled the fermenter out to ambient (~70° to 75°) to finish out.
  • I kegged the beer on 17 September 2021, adding whole Cascade hops to the keg at this point. Final gravity was 1.012, for 5.3% abv.

Tasting

  • Appearance
    • This is a deep gold beer with slight haze; it pours with an ivory and modestly persistent head.
  • Aroma
    • Light caramel malt aroma, with a modest orange/citrus hop aroma and clean yeast character.
  • Flavor
    • Light caramel and moderately malt-forward beer; bitterness is moderately high yet clean, with an orange/citrus-type flavor.
  • Mouthfeel
    • Medium body, medium carbonation, pleasantly lingering bitterness on the finish.
  • Would I brew this again?
    • Yes? This is a very 1990s type of pale ale, and would be typical of what you might find in a brewpub during the late 1990s/early 2000s. I like less caramel-forward pale ales in general, but this is nice as a variant on my usual. Next time, I might ditch the Munich or else swap the Maris Otter for the 2-row malt, to moderate the maltiness just a touch.
  • Overall
    • 8/10

Cascade-o Classico Pale Ale

Posted on by

IMG_20191005_144434Lately, I’ve had a soft spot for “classic” American pale ales, from the era before Citra, Mosaic, and Simcoe were a thing. I love the more subtle flavors of Cascade and Centennial…and the cheaper price point for those hops doesn’t hurt, either. I recently got a shipment of the new Cascade crop from my dad in South Dakota (he raises them for his own brewing), and decided to do another iteration of my Classico Pale Ale. Aside from the hops (Cascade instead of Falconer’s Flight), the only other change is upping the percentage of Maris Otter versus 2-row, from around 50/50 to 66/33 in the current recipe.

I know that you’re not supposed to put crystal malts in pale ales and IPAs, but I’ve decided that piece of advice is bunk in a well-brewed recipe with modest amounts of crystal malts. For this formulation, I think they add a subtle but important character, and I ain’t likely to remove them for future brews!

Cascade-o Classico Pale Ale

  • 7 lb. 0.5 oz. Maris Otter malt (Bairds)
  • 3 lb. 9 oz. 2-row pale malt (Rahr)
  • 8 oz. caramel 40 (Briess)
  • 4 oz. caramel 60 (Briess)
  • 0.70 oz. Warrior hop pellets (15.8% alpha), 60 minute boil
  • 1 Whirlfloc tablet, 10 minute boil
  • 2 oz. Cascade whole hops (~5.5% alpha), 5 minute boil
  • 1 pkg. Safale American ale yeast (US-05)
  • 2 oz. Cascade whole hops (~5.5% alpha), dry hop in keg

Target Parameters

  • 60 minute infusion mash, 152°, batch sparge
  • 1.058 o.g., 1.013 f.g., 46 IBU, 8 SRM, 6.0% abv
  • Claremont water with 1 tsp. of gypsum added during boil

Procedure

  • I mashed in with 3.2 gallons of water at 162°, to hit a 152.5° mash temperature.
  • After 60 minutes, I added 0.8 gallons of water at ~185°, let sit for 10 minutes, vorlaufed, and collected the first runnings.
  • Next, I sparged with 3.4 gallons of water, let it sit for 10 minutes, vorlaufed, and collected the second runnings.
  • In total, I collected 6.2 gallons of runnings with a gravity of 1.048, for 71% efficiency.
  • As I heated the runnings to a boil, I added 1 tsp. gypsum. Once the boil started, I added the various hops and Whirlfloc per the recipe.
  • After 60 minutes, I turned off the heat and chilled the wort. I transferred to the fermenter while aerating, and pitched the yeast. I am fermenting at 68°.
  • The beer was brewed on 24 August 2019, and fermentation signs were quite visible by the next morning.
  • I kegged the beer on 6 September 2019. Final gravity was 1.011, down from 1.058, for 6.2% abv. The dry hops were added to the keg in a mesh bag.

IMG_20191005_144934

Tasting

  • Appearance
    • Pours with persistent ivory-colored head; brilliantly clear and copper-colored beer
  • Aroma
    • Lightly caramel, citrus/piney aroma
  • Flavor
    • Slightly grainy, caramel flavor, with firm bitterness. Bitterness is slightly piney
  • Mouthfeel
    • Medium-light body, moderate carbonation, off-dry finish.
  • Would I brew this again?
    • Yes! This is a nice base recipe, and a good way to highlight classic American hops. I feel like it could use just a touch more body, so might mash at 154° next time. It might be interesting to try this with 100% Maris Otter or even Vienna malt, too, to give a bit more malt character I love how clear this beer has turned out–it clarified really quickly and nicely, to make an incredibly pretty brew.
  • Overall
    • 9.5/10

Classico Pale Ale

Posted on by

Following on my series of IPAs and pale ales, I recently worked on a “classic” American pale ale. Again, I wanted to avoid the really tropical notes (which I like, but have been getting burned out on), and elected to highlight the Falconer’s Flight blend here. It was a good success!

Classico Pale Ale

  • 5 lb. Maris Otter Malt (Bairds)
  • 5 lb. 2-row malt (Rahr)
  • 8 oz. crystal 40 malt (Great Western)
  • 8 oz. crystal 60 malt (Great Western)
  • 0.7 oz. Warrior hop pellets (15.8% alpha), 60 minute boil
  • 1 Whirlfloc tablet, 10 minute boil
  • 1 oz. Cascade whole hops (~4% alpha), 5 minute boil
  • 1 oz. Falconer’s Flight 7C’s hop pellets (9.8% alpha), 5 minute whirlpool
  • 1 pkg. Safale US-05 American Ale dry yeast
  • 1 pkg. Mangrove Jack’s M44 US West Coast Yeast
  • 3 oz. Falconer’s Flight 7C’s hop pellets (9.5% alpha), dry hop in keg

Target Parameters

  • 60 minute infusion mash, 152°, batch sparge
  • 1.055 o.g., 1.012 f.g., 5.7% abv, 44 IBU, 8 SRM
  • Claremont water with 1 tsp. of gypsum added during boil

Procedure

  • I mashed in with 3.75 gallons of water at 164°, to hit a mash target of 152°. After 60 minutes, I added 1 gallon of water at ~185°, let sit for 10 minutes, vorlaufed, and collected first runnings. Then, I added 3.3 gallons of water at 185°, let sit for 10 minutes, vorlaufed, and collected second runnings.
  • In total, I collected 6.5 gallons of runnings with a gravity of 1.046, for 76% mash efficiency.
  • I brought the runnings to a boil, adding everything per the recipe. After 60 minutes of boiling, I added the whirlpool hops, waited 5 minutes, and then began to chill the wort.
  • I transferred the wort to the fermenter, pitched the yeast, and set it to ferment at 67°.
  • I brewed this beer on 1 April 2019. Starting gravity was 1.054, and final gravity was 1.012 when I kegged it on 14 April 2019. This works out to 5.5% abv.

IMG_20190508_202711

Tasting Notes

  • Aroma
    • Hop-forward aroma, with light citrus and pine together, and a mild caramel quality behind that.
  • Appearance
    • Light copper color, hazy, with a persistent off-white head.
  • Flavor
    • The hops are at the front of the flavor, but aren’t overpowering. The hop flavor profile is a combination of citrus and tropical fruit with a hint of pine behind that. The malt flavor is slightly grainy/bready, with a faint caramel note. Really nice!
  • Mouthfeel
    • Medium-light body, with appropriate level of carbonation. The finish is smooth and off-dry.
  • Would I brew this again?
    • Yes! I really like this particular recipe, and think it pretty well represents what an American pale ale should be. The only minor concern (were I brewing this for competition) is the haze, which would undoubtedly settle out given more time. Otherwise, what a great beer!
  • Overall
    • 9/10