Claremont Summer Ale

Posted on by

The brewing season is nearing an end here in southern California, so it’s time to stockpile some refreshing beers for the coming warm months. I also had a few packages of grains and hops pellets sitting around that needed to be used up. The result: a recipe for Claremont Summer Ale. I built the recipe in BeerSmith, using the Blonde Ale style as a rough guide.

Claremont Summer Ale

  • 6 oz. 20°L crystal malt
  • 8 oz. carapils malt
  • 8 oz. Munich malt
  • 3 pounds light dry malt extract
  • 3 pounds pale (extra light) dry malt extract
  • 1 oz. Cascade pellet hops
  • 1 oz. Mt. Hood pellet hops
  • 1 tsp. Irish moss
  • 1 package East Coast Ale Yeast (White Labs #WLP008)

 Steps

  • I heated 3 gallons of water to 158° F, and steeped the grains at this temperature for 1 hour (plus or minus a few degrees).
  • Then, I sparged the grains with a gallon of water, bringing the brew kettle up to 4 gallons total. Upon heating the mixture to boiling, I turned off the heat, added the DME, and brought it all back to boiling again. The Cascade hops were added.
  • After 45 minutes of boiling, I added the Irish moss.
  • After 58 minutes of boiling, I added the Mt. Hood hops.
  • After 60 minutes of boiling, I removed all of the hops and chilled the wort.
  • I decanted the mixture (except 0.5 gallons of trub) into the primary fermenter, and topped up with water to 4.75 gallons. The temperature was 68° F, and I pitched the yeast directly in.
  • BeerSmith estimated my starting gravity to be 1.057 (slightly outside the blonde ale style), with 18.1 IBUs, a color of 6.7 SRM, and estimated ABV at 5.5%. The actual starting specific gravity was 1.052, and I expect the color will be a little lighter than estimated too. The most likely reason for this is that I poured off such a healthy amount of trub. The end result is that I should be within the style for a blonde ale (for whatever that’s worth).

Fake Tire Amber Ale 1.1

Posted on by

My first batch of Fake Tire Amber Ale is amazing. In my (non-humble) opinion, it’s probably one of the best recipes I’ve done yet. A genuinely biscuit-ish flavor (just like Fat Tire!), clear appearance, and nice head combine deliciously. The downside of this is that I have finished most of the batch. Watching my dwindling supply, I decided to take action and brew up another batch today. I made some small changes, largely on account of what was available for ingredients.

Changes from first batch
Nothing major – instead of whole hops, I used hops pellets. This presumably has the effect of upping the hops utilization a little bit, but according to BeerSmith it’s not a major amount. 21.9 IBU’s versus 24.1 IBU’s for the whole and pellet hops, respectively. Given the margin of error in IBU measurements for hops, as well as the margin of error inherent to home brewing, I decided not to mess with the recipe.

The only other major variation was that I topped up to just a hair under 5 gallons, with a starting gravity of 1.050. I presume the larger amount of water was needed to get close to last time’s gravity (1.051) because I decanted a little more of my wort into the brewing bucket than I did previously.

In any case, I will be curious to see how this one turns out!

Socks-Off IPA

Posted on by

This IPA is so-named because it will “knock your socks off”, between the hops and the potential alcohol content. My wonderful spouse got me a “home-brewed” IPA kit from our local small brew store (i.e., one thrown together by the owner) for Christmas, so I decided to brew it up tonight, with a few minor modifications for what ingredients I had on hand and wanted to use up.

Socks-Off IPA

  • 0.66 lbs. Munich malt
  • 3.75 lbs. Pale Malt, Maris Otter
  • 3.3 lbs. Briess Amber Liquid Malt Extract
  • 3.3 lbs. Briess Golden Light Liquid Malt Extract
  • 3.3 lbs. Briess Bavarian Wheat Liquid Malt Extract
  • 3 oz. Cascade hops (whole)
  • 1 oz. Hallertauer hops (whole)
  • 1 oz. Sterling hops (whole)
  • 1 oz. Saaz hops (whole)
  • 1 tsp. Irish moss
  • 2 oz. Northern Brewer hops (pellets)
  • 1 package London Ale III yeast (Wyeast Labs #1318)

Steps

  • I heated 3 gallons of tap water to 154° F, and steeped the grains for one hour (between 154° and 156° F). Then, I sparged the grains with one gallon of water at roughly 160° F, to bring the total volume to 4 gallons (or just a little over).
  • After bringing the mixture to a boil, I turned off the heat and added the liquid malt extracts. Then, I heated the kettle back to a boil (again) and added the whole Cascade, Hallertauer, and Sterling hops.
  • After 45 minutes, I added 1 tsp. of Irish moss.
  • After 55 minutes, I added the Saaz hops.
  • After 60 minutes, I removed all of the hops and chilled the wort. Once it had gotten down to an appropriate temperature, I added the wort to my fermenter. The volume at this point was 3.5 gallons, so I topped up with cold tap water to roughly 5.25 gallons.
  • The temperature of the wort was 76° F. I pitched the yeast, sealed the lid, and let the yeast do its thing.
  • Starting gravity was 1.072 – right at the upper of end of the American IPA style. BeerSmith estimates the bitterness at 59.3 IBU, color at 11.7 SRM, and ABV at 7.1%. 
  • In a week or so, I’ll move the mixture over to my secondary fermenter, and add the Northern Brewer pellets for dry-hopping.

In other news, I’ve started using the BeerSmith software to formulate my recipes. The excellent reputation of the program is quite deserved – it’s flexible and friendly to extract brewers as well as all-grain brewers.

Amber Ale, Vanilla Porter, and Irish Stout Updates

Posted on by

A few updates condensed into one post. . .

Vanilla Voay Porter
This experimental brew (recipe, update, and update) was bottled on Saturday, December 10. This gave the vanilla extract/pods around two weeks in the secondary fermenter – the chopped and scraped pods floated on the surface, and many of the tiny seeds were everywhere in the fermenter.

Final gravity was 1.016, from a starting gravity of 1.056, giving 5.25% alcohol by volume. Final yield was just over 5 gallons of beer(!), with 30 12-oz. bottles, 12 1-pt. bottles, and 4 22-oz. bottles.

Four days after bottling, I was impatient and opened one of the small bottles. Carbonation was still very slight, but the flavor and aroma were delicious. A faint vanilla scent, but a rich vanilla flavor (not overpowering though, thankfully). I’m very excited to see how this is going to mature over the next few weeks!

Fake Tire Amber Ale
One week after brewing, I transferred my Fat Tire clone into the secondary fermenter. The aroma was very estery, with a strong banana component. I might have been a little worried, except the yeast strain is known to do this. The gravity was around 1.014 at this point, and hadn’t changed at all when I racked the beer into the bottling bucket today (December 17, 19 days after brewing). This gives 5% alcohol by volume, a little less than the 5.2% of real Fat Tire.

From this batch, I got 20 12-oz. bottles, 14 1-pt. bottles, and 1 22-oz. bottle. Next time I might try scaling the recipe up a bit.

When preparing to bottle, I’m very impressed by the absolute clarity of the beer. This bodes well for the final product (which I’ll probably test in a week’s time – Christmas Eve!).

Coopers Irish Stout
The Irish stout I made a few weeks ago has matured into a wonderfully drinkable brew. The head is a nice caramel-color, and isn’t overwhelming, but certainly sticks around the edges of the glass after pouring. The flavor has a hint of malt and is dominated by the roasted grains, and has a nice dry finish (as expected for the style). As I noted at the time of bottling, it’s not a very exciting beer (middle of the road flavor – good but no really unusual highlights), but it’s certainly a solid one.

This kit was cheap, fast, easy, and tasty – perfect for the beginning or end of the brew season when I just want to crank something out! I’ll admit that it’s not quite as much fun as doing everything from scratch, but then again that’s also a welcome break sometimes. I expect I’ll probably do this kit (or a similar one) again!

Irish stout, in the glass

Fake Tire Amber Ale

Posted on by

I’ve always liked Fat Tire (from New Belgium Brewing), and have previously found clone recipes to be a good way to experiment with various styles and flavors. Thus, tonight’s brew was modeled after two different Fat Tire recipes I found kicking around the Internet. These are followed reasonably closely, except for the hops – I used what I had on hand, so this will almost certainly modify the resultant into something Fat Tire-ish rather than a spot-on Fat Tire (if such a thing is genuinely possible). Thus, I’m calling this batch. . .

Fake Tire

  • 5 pounds plain extra-light DME
  • 0.5 lb Munich light malt
  • 0.5 lb Carapils malt
  • 0.5 lb biscuit malt
  • 0.5 lb crystal malt (20° Lovibond)
  • 0.5 lb crystal malt (40° Lovibond)
  • 1.0 oz chocolate malt
  • 1.0 oz. Cascade hops (60 minutes boil)
  • 1.0 oz. Mt. Hood hops (5 minutes boil)
  • 1 tsp. Irish moss (15 minutes boil)
  • Wyeast 1272 (American Ale II)

Steps

  • I heated 3.5 gallons of tap water to 154° F (usually hovering around 156° to 158°), and steeped the grains for 45 minutes. Then, I sparged the grains with 0.5 gallons of tap water at 154°.
  • After bringing the mixture to a boil, I turned off the heat and added the malt. I brought it back to a boil, and threw in the Cascade hops.
  • After boiling for 45 minutes, I added 1 tsp. of Spanish moss.
  • After boiling for another 10 minutes (for 55 minutes total boil), I added the Mt. Hood hops.
  • After 5 more minutes (60 minutes total of boiling), I cooled the wort with my chiller, added cold tap water to a total of 4.5 gallons, and pitched the yeast. Pitching temperature was 74° F, and starting gravity was measured at 1.052. The wort is a nice amber color (as befits an amber ale).

As I refined the recipe, I played around with some calculators for IBU and starting gravity. I got an estimated boil gravity (4 gallon boil) of 1.077; with a top-up to 5 gallons, this gives an estimated IBU of 20.7 and estimated starting gravity of 1.061. My actual starting gravity was a little lower, at 1.052. Part of this discrepancy could be the sludge I left in the bottom of the brew pot, and the other could just be errors in the brew calculator.

New Belgium officially gives an “OG” of 12.6 and an “FG” of 2.2 for Fat Tire, which I think is on the Brix scale (even if not stated). This translates to 1.051 and 1.009. Thus, my original gravity is quite close! We’ll see if this comparability is maintained through fermentation. (as a side-note, they measure 18.5 IBU and 5.2% ABV, too)

I’ve never fermented with American Ale II before, so I’m curious to see how it works out. Judging by the Wyeast website, this should be a nice little strain.

The grains, waiting to steep