Tag Archives: tastings

Pilsnerpeton

Posted on by

I’m slowly and steadily improving my German pils game, and feel like this one is a winner! It’s a super basic recipe, but my philosophy has always been that the best pilsners are accentuated by skill and quality ingredients, rather than endless ingredient lists.

The name is a cheeky reference to a naming convention in zoology, with many amphibians, reptiles, and relatives getting an “-erpeton” suffix. It translates literally as “reptile” or “creeping thing.” Acquaintance Brad McFeeters cheekily noted that Pilsnerpeton would be a great name for a lagerpetid (dinosaur cousin), and I thought it would also be a euphonious name for a beer! I might keep it as the name for my house German pils recipe from here on out…

Pilsnerpeton

  • 10 lb. Viking Pilsner Zero malt
  • 0.4 oz. Perle hop pellets (7.1% alpha), 60 minute boil
  • 0.15 oz. Sterling hop pellets (7.4% alpha), 60 minute boil
  • 1.0 oz. Perle hop pellets (7.1% alpha), 10 minute boil
  • 0.25 oz. Mt. Hood hop pellets (4.6% alpha), 10 minute boil
  • 1 tsp. Fermax yeast nutrient, 10 minute boil
  • 1 WhirlFloc tablet, 5 minute boil
  • 1 pkg. Global liquid yeast (Imperial #L13)

Target Parameters

  • 1.046 s.g., 1.006 f.g., 5.2% abv, 4 SRM, 26 IBU
  • Full volume step mash, with 30 minute rest at 142°, 40 minute rest at 156°, and 10 minute mash-out at 168°
  • Claremont tap water, treated with Campden tablet.

Procedure

  • Around 12 hours in advance of pitching, I made a 1.5L SNS (shaken-not-stirred) starter with 150 g of light DME.
  • I heated 7.25 gallons of water to 147°, and mashed in the grains. I added 5 mL of 88% lactic acid to adjust pH.
  • I held the mash at 142° for 30 minutes, and then raised it to 156°, which took approximately 9 minutes. After 40 minutes at 156°, I raised the temperature to 168°, which took around 10 minutes. I held it at this temperature for 10 minutes, before removing the grains and bringing the kettle to a boil.
  • The gravity out of the mash was 1.039, with 6.4 gallons collected. This equates to 67% mash efficiency.
  • Once the kettle was boiling, I added hops and kettle finings per the recipe.
  • After a 60 minute boil, I turned off the heat and chilled down to 88° while recirculating. At this point, I stopped recirculation and let the wort settle for 30 minutes.
  • Then, I transferred the wort to the fermenter, discarding around 1 gallons of trub. This was probably a bit more than I needed to get rid of, and would aim for ~0.5 gallons next time.
  • In the fermenter, I chilled the wort down to 49°, over a 3 hour period. I oxygenated the wort for 40 seconds, and then pitched the yeast.
  • I brewed the beer on 28 December 2020. Starting gravity was 1.044.
  • I started fermentation at 48°, with a free rise to 50° after pitching. I raised the beer to 54° on 1 January 2021, 56° on 5 January, and 60° on 9 January. I cold crashed down to 34° on 16 January 2021.
  • I kegged the beer on 30 January 2021, after two weeks of cold crashing.
  • Final gravity was 1.013, down from 1.044, for 4.1% abv. The final gravity was a bit higher than predicted by BeerSmith, but I think that’s because the software doesn’t do well with calculating wort fermentability from step mashes.

Tasting

  • Appearance
    • Very clear light gold beer, just shy of brilliant, with a beautifully creamy, tall, and persistent white head. It has wonderful lacing down the side of the glass as you drink it.
  • Aroma
    • Malty sweet and cracker notes in a moderate malt aroma. There is a low level of “spicy” hop character. I might like a little more hop aroma, but that’s a minor fault.
  • Flavor
    • Clean, malty-sweet character, with moderate level of very smooth bitterness. The hop flavor is herbal/spicy, with a clean finish. The bitterness lingers pleasantly.
  • Mouthfeel
    • Medium-light body, moderate carbonation, very smooth finish.
  • Would I brew this again?
    • Yes! The malt/hop balance are perfect for my taste, so I think ~25 IBU in a lower-gravity pils is a sweet spot for my preference. Clean fermentation character and clean malt make this taste so good! I might try some hop adjustments for the late hopping to improve aroma, but that is the only real fault in this beer.
  • Overall
    • 9/10

2021 Orange Summer Wheat Ale

Posted on by

I last brewed this recipe awhile back, and it was high time to make it again! It’s basically the same recipe as before, just modified slightly for the efficiency of my current system and on-hand ingredients. It’s super simple, but really tasty!

2021 Orange Summer Wheat Ale

  • 6 lb. white wheat malt (Briess)
  • 3 lb. 2-row malt (Viking Xtra Pale)
  • 8 oz. caramel 10L (Briess)
  • 8 oz. rice hulls
  • 1.5 oz. Mt. Hood hop pellets (4.6% alpha), 60 minute boil
  • 1 tsp. Fermax yeast nutrient, 10 minute boil
  • 1 pkg. American Hefeweizen Ale yeast (WLP 320)

Target Parameters

  • 1.044 s.g., 1.011 f.g, 4.3% abv, 26 IBU, 4 SRM
  • Full volume infusion mash, 152° for 60 minutes
  • Claremont tap water

Procedure

  • I made a 1L shaken-not-stirred starter around 4 hours before pitching. It took off pretty well!
  • I mashed in with 7.25 gallons of water at 158°, to hit a mash temperature of 152°. I added 5 mL of 88% lactic acid to adjust the pH.
  • After a 60 minute mash, I removed the grains.
  • In total, I had 6.5 gallons of runnings with a gravity of 1.040, for 72% mash efficiency.
  • I brought everything to a boil, adding hops and finings per the recipe.
  • After 60 minutes, I chilled down to 66° and transferred to the fermenter. I pitched the yeast, and let it ferment at 66°.
  • I brewed the beer on 13 February 2021, with a starting gravity of 1.045.
  • I had 5.5 gallons in the fermenter, and fermented it at 64° to 66°, as I moved it in and out of the house and garage.
  • While I started the beer, I zested three Valencia oranges that I had picked, putting the zest in 3 oz. of vodka. This steeped for 3 weeks, and then I strained it to add to the keg.
  • I kegged the beer on 27 February 2021. It had great flavor and aroma on the base beer, even before I added the orange extract.
  • Final gravity was 1.010, down from 1.045. So, it had an estimated abv of 4.6%.

Tasting

  • Appearance
    • Pale gold color and hazy, with a thin white head that is moderately persistent.
  • Aroma
    • Fresh orange zest, with a faint doughy wheat character behind that. Really awesome!
  • Flavor
    • Orange juice flavor at the forefront, with a bread dough malt character behind that. Bitterness level is moderate, perhaps a little higher than works for this beer. Yeast character is very clean, with no noticeable esters.
  • Mouthfeel
    • Medium-light body, moderate carbonation, off-dry finish.
  • Would I brew this again?
    • This is a really, really nice recipe…the orange character is absolutely perfect. It’s a bit more bitter than I envisioned in the early tastings, so when I brew this again I’m going to back it down to 20 IBU. Interestingly, as it has aged a bit in the keg that overly bitter edge has been reduced. Otherwise, I wouldn’t change a thing.
  • Overall
    • 10/10

English IPA

Posted on by

Two years ago I made a down-the-middle English IPA, which was a super satisfying beer. I decided it was time to do a re-brew, with slight modifications for my upgraded brewing system as well as ingredients on-hand.

deep gold beer in clear glass

English IPA

  • 12 lb. Maris Otter ale malt (Crisp)
  • 10 oz. white wheat malt (Briess)
  • 8 oz. biscuit malt (BlackSwaen)
  • 6 oz. crystal 120 malt (Great Western)
  • 6 oz. crystal 60 malt (Great Western)
  • 1 oz. Magnum hop pellets (10.1% alpha), 60 minute boil
  • 1 oz. East Kent Goldings (EKG) hop pellets (5.0% alpha), 15 minute boil
  • 1 oz. Fuggles hop pellets (4.7% alpha), 15 minute boil
  • 1 Whirlfloc tablet, 5 minute boil
  • 1 oz. East Kent Goldings (EKG) hop pellets (5.0% alpha), 10 minute whirlpool
  • 2 pkg. Nottingham ale yeast (Lallemand)
  • 3 oz. East Kent Goldings (EKG) hop pellets (5.0% alpha), dry hop in keg

Target Parameters

  • 1.063 s.g, 1.016 f.g., 6.2% abv, 51 IBU, 12 SRM
  • Full-volume infusion mash, 154° for 60 minutes
  • Water built from Claremont tap water with mineral additions.

Procedure

  • I heated 7.5 gallons of water to 163°, adding 8 g of gypsum and a Campden tablet.
  • I mashed in with the grains, maintaining the temperature at 154° for 60 minutes. Next, I raised the temperature to 168° for the mashout.
  • In total, I collected 6.4 gallons of runnings with a gravity of 1.054, for 67% mash efficiency. This is pretty close to my target, so I’m quite happy with this result.
  • I boiled for 60 minutes, adding hops and kettle finings per the recipe. After the boil, I chilled and transferred to the fermenter.
  • I brewed this beer on 16 January 2021. It had a starting gravity of 1.064. I fermented at 66°.
  • I kegged the beer on 13 February 2021, putting the hops in a baggie in the keg. Final gravity was 1.019, for 5.9% abv.

Tasting

  • Appearance
    • Clear with a deep gold color; the thin white head is moderately persistent.
  • Aroma
    • Malt, light caramel character, with a low level of fruity yeast character. The hop aroma is a bit underwhelming, with little to speak of.
  • Flavor
    • Moderately high, slightly herbal bitterness, but not over the top. It is a moderately-high malty beer, with a bit of caramel and toffee in the malt character. The bitterness is really smooth, and very nicely balanced against the malt.
  • Mouthfeel
    • Medium-full body with moderate carbonation and an off-dry finish. The beer is very smooth for the level of bitterness!
  • Would I Brew This Again?
    • This is a pretty good beer overall. The color and clarity are gorgeous, as is the malt character. I would like a bit more hop aroma in the nose and a bit more hop flavor, beyond just the bitterness. I might try switching up the dry hop combination for future versions.
  • Overall
    • 7/10

London Porter

Posted on by

Because I purchased a 55 pound sack of Maris Otter a few months ago, I have been on a bit of an English ale kick. Next stop: porters! I don’t brew this style nearly often enough, especially in its English incarnation. The particular recipe here was modified from the London Porter in Gordon Strong’s Modern Homebrew Recipes. I adjusted the base recipe slightly for the malt brands I had on-hand, and reduced the amount of brown malt slightly to account for my in-house supply. At the end of 2020, I found a bunch of 1 lb. bags of Warminster malts on sale, so loaded up on those for this recipe. I hadn’t used that brand before, and thought a good English malt would be a match for this one.

London Porter

  • 8 lb. Maris Otter ale malt (Crisp)
  • 1 lb. brown malt (Warminster)
  • 1 lb. Crystal 60 malt (Warminster)
  • 0.75 lb. Munich Light malt (Chateau)
  • 10 oz. chocolate malt (Dingemans)
  • 6 oz. Crystal 80 malt (Warminster)
  • 1 oz. Fuggles hop pellets (4.7% alpha), 60 minute boil
  • 1 oz. East Kent Goldings (EKG) hop pellets (5.0% alpha), 10 minute boil
  • 1 Whirlfloc tablet, 5 minute boil
  • 1 pkg. London ESB English Style Ale Yeast (Lallemand)

Target Parameters

  • 1.051 s.g., 1.013 f.g., 5.0% abv, 23 IBU, 27 SRM
  • Full volume infusion mash, 153°; 60 minute boil
  • Claremont water, with 2 g of gypsum to get water profile with 96 Ca, 64 SO4; added Campden tablet to remove chloramines.

Procedure

  • I mashed in with 7.5 gallons of water at 160°, to achieve a mash temperature of 153°. After 60 minutes, I raised the heat to 168° and held it there for 15 minutes before removing the grains.
  • In total, I got 6.45 gallons of runnings with a gravity of 1.043, for 65% mash efficiency. I had used the small-batch adapter ring for my Foundry, because some have anecdotally said it made a difference. I didn’t notice any change, at least for this batch.
  • I brought the runnings to a boil, adding finings and such per the recipe.
  • After a 60 minute boil, I chilled and transferred to the fermenter.
  • Starting gravity was 1.050, with 5.5 gallons transferred into the fermenter.
  • I brewed this beer on 8 January 2021.
  • I fermented at 66° for the first two days, which was ambient in the garage. The temperature dropped a bit on the third day, so I moved it inside to ~65° on 10 January 2021.
  • I kegged the beer on 24 January 2021, after 16 days of fermentation. Gravity at this point was 1.025, way higher than I expected. I suspect the yeast had crashed out a bit early. I added 3 oz. of corn sugar boiled in 1 cup of water, for carbonation.
  • It seems that the beer kicked off fermentation in the keg again, because gravity measured 1.020 on 4 February, when I checked it again. That works out to 4.0% abv.

Tasting

  • Appearance
    • The beer pours with a thick tan head that subsides moderately quickly, with good retention. The beer itself is dark brown, with a fair bit of yeast haze. I’m pretty disappointed with the lack of clarity…I suspect this is due in part to the ESB yeast (which has given me issues previously), and a potentially stalled fermentation that kept things in suspension longer than usual.
  • Aroma
    • There is a roasty toasty malt character at the forefront–really nice. The hop character is slightly earthy, with a low level of dried stone fruit (?cherry) in the yeast character.
  • Flavor
    • The beer has a roasty, slightly nutty flavor, with a medium-high level of maltiness. The balance is tilted towards the malt, with a medium-low bitterness on the back end. The beer brings out a bit of a caramel character along with an interesting dried stone fruit character as it warms up in the glass. There is a very slight sweetness, as well as a subtle licorice character.
  • Mouthfeel
    • Medium-full body, with medium-low carbonation.
  • Would I Brew This Again?
    • This is a good enough beer, but not fully to my tastes. The malt and hop character are pretty great (I would use Warminster malts again for any English beer!), but the yeast was a complete disappointment. I am fairly shocked that it was still in suspension nearly 6 weeks after kegging and conditioning in the keg. I probably should have used a bit of gelatin earlier in the process; but that’s just not typical for my dark beers! I might make this recipe again, but would probably stick with Nottingham or something that clears up a bit more quickly.
  • Overall
    • 6/10 (main deductions for clarity)

Off the Rails Belgian IPA

Posted on by

One of my favorite local establishments is The Back Abbey, a little place in Claremont that has been a gathering spot to celebrate special occasions, and sometimes just to enjoy a nice meal (their fries are the best in the area). They also have a phenomenal selection of draft and bottled Belgian beers. When I want a treat, I’ll order a glass of Houblon Chouffe, a Belgian IPA. It has a cute gnome on the logo, and the beer is pretty good too! Because we’re not eating out much these days, I’ve been missing that beer. And the fries.

Thankfully, as a homebrewer I can fairly easily make a clone brew and enjoy my own version at home. I did a bit of looking around online, and found a clone recipe based on Houblon Chouffe that seemed pretty decent. The beer is fairly high octane, so I elected to do a 3 gallon batch rather than my usual 5 gallons. As noted below, I had to improvise a ton to hit my marks, so I dubbed this “Off the Rails Belgian IPA”. The improvisation made things a bit frantic, but also kinda fun.

The result was pretty great. It drank super easily, especially for something pushing 10% abv. The keg is drained, but here are the overall details and tasting for posterity’s sake.

Off the Rails Belgian IPA (Houblon Chouffe Clone)

  • 10.5 lb. Viking Pilsner Malt
  • 1.5 lb. white sugar
  • 0.55 oz. CTZ hop pellets (15.8% alpha), 60 minute boil
  • 0.25 oz. CTZ hop pellets (15.8% alpha), 20 minute boil
  • 1 tsp. Fermax yeast nutrient, 10 minute boil
  • 1 Whirlfloc tablet, 5 minute boil
  • 0.5 oz. Saaz hop pellets (5.3% alpha), 5 minute boil
  • 1 pkg. Belgian Ale yeast (WLP550)
  • 1 oz. Amarillo hop pellets (7.7% alpha), dry hop in fermenter

Target Parameters

  • 1.084 s.g., 1.009 f.g., 10.0% abv, 52 IBU, 5 SRM
  • Infusion mash, full volume, 144° for 30 minutes, 154° for 70 minutes, 168° mashout for 10 minutes
  • Claremont tap water, with Campden tablet to remove chloramine

Procedure

  • The night before brewing, I made a 1 liter shaken-not-stirred starter for the yeast. I also prepped the brewing water.
  • I mashed in with 5 gallons of water at 152° and 3.75 mL of 88% lactic acid, to target a mash temperature of 144°. It was a touch low at first (142°), so I extended the first mash rest to 30 minutes instead of 20 minutes as planned.
  • As the mash recirculated, I got a stuck sparge about 20 minutes in. It manifested as foaming in the mash, and a low water level outside my grain basket. Argh! I added two handfuls of rice hulls, which worked for a bit until it got stuck again. I hadn’t used the small batch adapter, so maybe that was the issue? Or perhaps it was the thickness of the mash? Either way, I had to watch things pretty carefully, and there definitely was some aeration (argh).
  • After 30 minutes at 144°, I raised the mash to 154° and held it there for 70 minutes, before finishing the mash cycle at 168° for 10 minutes.
  • I thought I had only put in 8.5 pounds of pilsner malt, but had actually put in 10.5 pounds. This led to a surprise gravity reading waaay above what I had calculated. With 1.067 after the mash and 1.080 after adding the sugar, I needed to thin things out a bit. So, I added 0.5 gallons of water to bring the gravity down to 1.072.
  • I boiled for 70 minutes, adding the hops as per the recipe. At the end of this, I ended up with 3 gallons, after discarding about a gallon of trub and a bit of extra wort. This brew session really went off the rails!
  • I brewed this beer on 12 December 2020. Starting gravity was 1.084.
  • I chilled the beer down to 75°, transferred to the fermenter, and chilled it to 65°. I aerated for 30 seconds with pure O2, and pitched the yeast (12 December 2020). I held the fermenter at 65° for 48 hours and then let it free-rise to 70° (starting 14 December 2020). I let it free-rise to 75° after 48 hours (starting 16 Decembe 2020). I held it at this temperature for a week, and then let it free rise to 78° (on 23 December 2020). After 24 hours, I let the beer drop to 70° (beginning 24 December 2020). I removed the beer from the fermentation chamber and brought it in to ambient (~65°) to finish fermentation, 19 days after brewing (1 January 2021). The gravity was 1.015 at this point, so I agitated the fermenter to rouse the yeast and hopefully help spur the last bit of fermentation.
  • I had steady bubbling in the airlock by the morning after pitching the yeast, and vigorous bubbling into a blowoff tube within 48 hours. I changed out the blowoff jar twice. The most vigorous aspect of fermentation was done by 19 December (one week after pitch), so I switched over to an airlock. The airlock had a crack, so tended to leak liquid…unfortunately, I think this means the fermentation got a little more latent oxygen than desirable.
  • I moved the beer to a ~64° location on 7 January 2021, adding the dry hops at this point. I cold crashed on 10 January 2021, and kegged on 15 January 2021.
  • Final gravity was 1.013, for 9.6% abv.

Tasting

  • Appearance
    • Medium gold beer, fairly clear; it has a pillowy and persistent white head.
  • Aroma
    • The aroma is wonderful! It is quite spicy, like gingerbread or spice cake, showcasing a really nice Belgian yeast aroma. The hops definitely faded a bit over time, starting out as herbal and slightly grassy, fading to a low herbal note towards the end of the keg. There is a light pear-like yeast character.
  • Flavor
    • Very clean! There is a wonderful hop/malt balance, with no boozy notes to speak of. Malt level is medium-low, with a cracker quality. Bitterness is relatively high, with an herbal and piney character, but that had faded a bit over time. There is a slight pear quality to the yeast, with spicy and peppery aspects more at the front.
  • Mouthfeel
    • Highly carbonated, medium-light body, with a medium-dry finish.
  • Would I brew this again?
    • Absolutely! I’m super pleased with the results, particularly in how well I nailed the yeast management. This fermentation schedule (gradual ramp up and gradual ramp down) seemed to do really well for WLP550, and I would absolutely use that again. I may have had some minor oxidation issues due to the mash problems as well as the airlock going dry, which resulted in a faster hop fade and slightly darker color than desired. The beer was definitely a deeper gold hue than I expected for 100% pilsner malt (with white sugar). I didn’t notice any sherry or cardboard or honey notes that I usually associate with oxidation, but I bet it would have manifested if I had let it age out a bit more. In any case, I’m super pleased with the overall result, and will give it another try someday when I want a high gravity sipper. I’ll need to reconfigure the malt and water quantities for a more carefully constrained future batch, but that should (hopefully) be trivial. I might also lower the second mash rest to 150° or so, to help dry out the beer a bit more. It finished a touch higher than desired, so I’ll mash a bit lower next time for the second step.
  • Overall
    • 9/10