Tag Archives: german ale

Kölsch Minimus

Posted on by

I keep coming back to the kölsch style, iterating through various grain bills and yeast choices. My past attempts (here [with process notes], here, and here) have been pretty good, but not quite on the mark of what I’m looking for.

pale gold beer with thin white head in clear glass, sitting on glass patio table

My recipes have evolved considerably over three attempts. The first version (Vitamin K Kölsch Clone), brewed way back in 2015, was a fairly typical American brewpub version, with a measure of wheat malt. My next version, Kölsch Simple, used a Kolsch base malt from Schill Malting, but ended up a bit darker and maltier than typical for the style. My most recent attempt, Kölschy Kölsch, was closer to the mark but still a bit stronger on the malt character than I wanted.

So here we are at kölsch attempt number four! I wanted something quite drinkable, with an abv on the lower end of things, and a simple malt character. Kölsch Minimus is the result! My recipe philosophy was to go with a majority (95%) pilsner malt, and then a touch of Munich I (5%) to add a teeny bit of character. Hops were all American equivalents of German hops, and I used a dry yeast (K-97) for fermentation.

Kölsch Minimus

  • 9.5 lb. pilsner malt (Weyermann)
  • 0.5 lb. Munich I malt (Weyermann)
  • 0.8 oz. Sterling hop pellets (7.4% alpha), 60 minute boil
  • 1 tsp. Fermax, 10 minute boil
  • 1 Whirlfloc tablet, 5 minute boil
  • 0.2 oz. Sterling hop pellets (7.4% alpha), 5 minute boil
  • 1 pkg. SafAle German Ale yeast (K-97)

Target Parameters

  • 60 minute infusion mash, 152°, batch sparge
  • 1.046 o.g., 1.012 f.g., 4.5% abv, 21 IBU, 3 SRM
  • Claremont tap water adjusted to hit hit 52 ppm Ca, 2 ppm Mg, 26 ppm Na, 40 ppm SO4, 94 ppm Cl, 24 ppm HCO3, -19 ppm RA, 20 ppm alkalinity

Procedure

  • The night before brewing, I prepared my water by adding 7.5 mL 88% lactic acid and 1/2 Campden tablet to 9 gallons of tap water. The lactic acid knocked out the carbonates, to bring the hardness of the water down.
  • I mashed in with 3.5 gallons of water at 163°, to hit a mash temperature of 152°. After 60 minutes, I added 1.5 gallons of water at 185°, let sit 10 minutes, vorlaufed, and collected the first runnings. I then added another 3.75 gallons of water at 185°, let sit 10 minutes, vorlaufed, and collected the second runnings.
  • In total, I collected 7.2 gallons of runnings with a gravity of 1.041, for 77% mash efficiency.
  • I boiled the wort for 60 minutes, adding hops and finings per the recipe.
  • After the boil, I chilled the wort down to 74°, transferred it to the fermenter, pitched the yeast, and chilled the beer the rest of the way down to 64° in the fermentation chamber.
  • I brewed the beer on 7 June 2020, with a starting gravity of 1.048.
  • I kept fermentation temperature at 64° for six days (until 13 June 2020), when I moved the fermenter to ambient in order to make room for another beer in the fermentation chamber. By this point, bubbling through the airlock had largely ceased.
  • I kegged the beer on 22 June 2020, transferring into a CO2-purged keg. The fermenter had a slight whiff of sulfur when opened; it wasn’t overpowering, and was subtle enough to be pleasant against my taste of the uncarbonated beer.
  • Final gravity was 1.009, for 5.1% abv.

Tasting

  • Aroma
    • Subtle malt aroma with a slightly grainy character; I don’t pick up any fruitiness from the yeast, but there is a very subtle sulfury character that is quite pleasant against the malt. No noticeable hop aroma.
  • Appearance
    • Pale gold, slight haze; white head that thins out shortly after pouring but is reasonably persistent
  • Flavor
    • Soft, highly drinkable beer, with a pleasantly understated grainy/sweet malt character. Bitterness is moderate against the malt, and quite smooth. Hop flavor is low, with a spicy quality (as expected with these hops). I get very little in the way of yeast character.
  • Mouthfeel
    • Medium-light body, moderate carbonation, crisp finish.
  • Would I brew this again?
    • This is probably the best kölsch-style ale I have brewed to date. The malt character is exactly where I want it, and the hops are pretty much perfect too. I’m pleased with how the yeast performed here. The only minor flaw is in the clarity of the beer–I am simply too lazy to fine this batch, and I was a bit worried about oxidation if I opened up the keg. I suspect it will clarify a little more with extended time in the keg, although this is likely at the risk of flavor degradation.
  • Overall
    • 8.5/10

Alstadt Alt

Posted on by

German brewing is more than lagers and wheat ales, although I’ve certainly had fun with those lately. For my latest foray, I’m exploring the world of altbiers. I’ve brewed an Americanized version of this amber-colored ale previously, with moderately good results. However, I felt like it was time to delve once more into the classic style.

copper-colored beer with off-white head in clear glass, held aloft in hand

I started with the book on altbier by Horst Dornbusch. This volume is part of the Classic Beer Style series from Brewers Publications–I really love them because they are compact, informative, and full of recipes. Some of the books (like the altbier one) are over 20 years old now, which does make me wish for a minor polish to reflect advances in malts and yeasts available to homebrewers nowadays. Nonetheless, the series provides a really nice way to cut straight to the point of a style.

The altbier book has nine recipes of varying grain bills and starting gravities, so I started with something of lower alcohol and straightforward composition. This recipe was Alstadt Alt (p. 100 of the book), described as being typical of the style served in Düsseldorf. The recipe clocks in at 1.048 o.g., 4.8% abv, and 40 IBU. Its grain bill is fairly simple, with 60% “two-row malt,” 15% Munich, 15% Vienna, and 10% crystal 60. This is an area where I think a modern update would be most needed, so I had to punt a bit on malt varieties. I settled on a pilsner malt (consistent with recommendations from elsewhere in the book), with light Munich, Vienna, and American crystal 60. I suspect a German crystal equivalent (maybe CaraMunich II) would also work for the latter, and might produce something truer-to-style (whatever that means).

Curiously, my initial formulation came a bit short of the color in the book’s recipe, at 10 SRM vs. 18 SRM. As I played around in BeerSmith, substituting Munich II for Munich I barely kicked up the color (maybe by 0.5 SRM), and same for substituting in American 2-row for the pilsner malt. I have no idea why this is; perhaps a calculation error by the author? So, I added a touch of Carafa Special III to bring the color more closely to style (14 SRM). This is still a tiny bit lighter than the original recipe (18 SRM), but I thought would be just fine.

In any case, this was a fun batch to brew and a fun style to drink. I’ll be making more altbiers in the future!

Alstadt Alt

  • 6.25 lb. Superior Pilsen malt (Great Western)
  • 1.75 lb. Munich I malt (Weyermann)
  • 1.75 lb. Vienna malt (Great Western)
  • 1.25 lb. Crystal 60 malt (Great Western)
  • 2 oz. Carafa Special III
  • 0.75 oz. Magnum hop pellets (13.2% alpha), 60 minute boil
  • 0.5 oz. Mt. Hood hop pellets (4.6% alpha), 5 minute boil
  • 1 tsp. Fermax, 10 minute boil
  • 1 Whirlfloc tablet, 5 minute boil
  • 1 pkg. German Ale/Kolsch yeast (White Labs WLP029), repitched slurry from my kölsch

Target Parameters

  • 60 minute infusion mash, 152°, batch sparge
  • 1.049 o.g., 1.011 f.g., 5.0% abv, 34 IBU, 14 SRM
  • Claremont tap water

Procedure

  • I mashed in with 3.75 gallons at 162°, to hit a mash temperature of 151°. It was down to 149° after 30 minutes.
  • After a 60 minute mash, I added 1.3 gallons of water at 185°, let sit for 10 minutes, vorlaufed, and collected first runnings.
  • Next, I added 3.75 gallons of water at 185°, let it sit for 10 minutes, vorlaufed, and collected the second runnings.
  • In total, I collected 7.1 gallons of runnings with a gravity of 1.039, for 68% efficiency. This was a touch lower than expected, but we’ll just roll with it!
  • I brought the kettle to a boil, boiling for 60 minutes and adding hops and finings per the schedule.
  • After 60 minutes, I chilled down to 75°, transferred to the fermenter, and chilled down to 65° in the fermentation chamber.
  • Once the wort was at temperature, I pitched a slurry of yeast I had saved from my kölsch-style ale. Fermentation kicked off pretty quickly.
  • I brewed the beer on 9 May 2020, and it had a starting gravity of 1.047.
  • Fermentation was at 65° for around the first two weeks, and then I pulled it out to ambient for the rest of the fermentation.
  • I kegged the beer on 11 June 2020, adding 2.9 oz. of corn sugar in 1 cup of water. I had nearly a full keg, which was nice.
  • Final gravity was 1.012, for 4.6% abv.
  • I kept the keg at 66° until 20 June 2020, when I put it into the lagering chamber to cold crash at 33°. I also hooked it up to CO2 gas directly, to finish out carbonation to the desired level (~2.6 volumes of CO2).
  • As expected for the German ale yeasts, flocculation was pretty minimal, so on 22 June 2020, I added 1/2 tsp. of gelatin dissolved in 1/2 cup of water and held at 150° to pasteurize. In other circumstances, I might have been more patient, but I had a tap open up on my keezer, and wanted to fill the space!

Tasting

  • Appearance
    • Deep copper in color and clear, with an ivory-colored and relatively persistent head. The head starts pretty tall, but settles to a thin blanket as the beer warms up.
  • Aroma
    • Lightly bready aroma, slightly crusty, with a touch of caramel; maybe a hint of hop spice, but the aroma is decidely on the malty side. I don’t really pick up anything in the realm of yeast character.
  • Flavor
    • Bready malt character, very nice; moderate and firm bitterness, but the balance of the beer is nicely balanced between malt and hop (maybe slightly tilted towards the hoppy side). The beer is surprisingly light and quaffable. Hop character is pretty clean, with a spicy character. The finish is smooth, with an extended yet pleasant bitterness.
  • Mouthfeel
    • Moderately light body, moderate carbonation; finish is moderately dry but not overly so. This beer drinks very smoothly, especially as it has conditioned.
  • Would I brew this again?
    • This is a nice recipe…I’d definitely give it a try again! I would like to try it with an all-German grain bill, especially to substitute in CaraMunich II for the crystal 60. I like that this beer has plenty of malt character, without being cloying. It’s a pretty solidly drinkable summer amber beer. My perceptions of the beer match up partially with how it is described in the recipe. The beer is described as medium-coppper in color, and I perceive mine as a deep copper (there is no way their color value of 18 SRM isn’t amber!). Hop character is maybe a bit lower on mine (I don’t perceive much, and the recipe is described as having “a light hoppy nose”). In terms of the BJCP guidelines, it hit those pretty darned well. It could maybe have a touch more hop character in the aroma, but there is very little I would change about this beer otherwise. It’s a winner!
  • Overall
    • 9/10

Kölschy Kölsch

Posted on by

My homebrew club had a kölsch-style ale scheduled as our March contest beer. Well…world events meant that we couldn’t get together. But, I could still do my own tasting at home!

I decided to go for a super-simple beer, with a minimalist grain bill. Last year, I did a kölsch with the Kolsch malt from Schill malting. It turned out pretty well, but was a bit darker than acceptable for the style. So, I used around 1/3 of this malt and the rest was pilsen malt, to lighten up the beer and make the flavor a touch more subtle. I have read in several places that wheat malt is not frequently used in “traditional” grain bills, so I chose to leave this out. Finally, I used Liberty hops for an American twist, and chose WLP029 (White Labs’ German Ale/Kolsch yeast).

As for the recipe name…well, I wasn’t feeling that creative!

Kölschy Kölsch

  • 7.25 lb. Superior Pilsen Malt (Great Western Malting)
  • 3.5 lb. Kölsch (Schill Malting)
  • 1.5 oz. Liberty hop pellets (4.3% alpha), 60 minute boil
  • 1 Whirlfloc tablet, 5 minute boil
  • 0.5 oz. Liberty hop pellets (4.3% alpha), 5 minute boil
  • 2 pkg. German Ale / Kölsch yeast, WLOP024 (White Labs)

Target Parameters

  • 60 minute infusion mash, 151°, batch sparge
  • 1.047 o.g., 1.010 f.g., 4.9% abv, 24 IBU, 4 SRM
  • “Cologne-ish water”, built from 8.5 gallons of RO water with 3.5 g baking soda, 4.5 g of epsom salt, 4.0 g of calcium chloride, and 2.5 g of gypsum, to hit 52 ppm Ca, 14 ppm Mg, 30 ppm Na, 98 ppm SO4, 60 ppm Cl, 78 ppm HCO3, RA=19 ppm, alkalinity=64 ppm

Procedure

  • I mashed in with 3.6 gallons of water at 162°, to hit a 150° mash temperature. It was down to 146° after 45 minutes.
  • After 60 minutes, I added 1.25 gallons of water at 185°, let sit for 10 minutes, and vorlaufed before collecting the first runnings.
  • Next, I added 3.6 gallons of water at 185°, let sit for 10 minutes, vorlaufed, and collected the remainder of the runnings.
  • In total, I collected 7.2 gallons of runnings with a gravity of 1.041, for 76% efficiency.
  • I brought the kettle to a boil, adding hops and other ingredients per the recipe.
  • After a 60 minute boil, I turned off the heat and chilled the wort, before transferring to the fermenter and pitching the yeast.
  • Starting gravity was 1.050, and I fermented at 65°.
  • I brewed the beer on 25 January 2020, and had vigorous fermentation within 24 hours. I moved the beer to ambient conditions on 1 February 2020.
  • I kegged the beer on 29 February 2020, and was able to save around 1/2 quart of yeast for a future brew (probably an altbier).
  • Final gravity was 1.010, which equates to 5.3% abv.

Tasting

  • Appearance
    • Clear, nearly brilliant. Light gold color, with a fine white head. The head is low but persistent around the edges of the glass.
  • Aroma
    • Sweet graininess, with a light touch of honey and apple–almost a Riesling-type character. No hop aroma.
  • Flavor
    • Grainy and lightly sweet grain character, with a subdued apple or pear-like fruitiness. Hop flavor is minimal, although the bitterness is a little stronger than I anticipated.
  • Mouthfeel
    • Moderately light body; crisp, but not overly dry. There is a lingering hop bitterness in the finish…it hangs around perhaps a touch more than is completely enjoyable for my taste.
  • Would I Brew This Again?
    • This is a pretty good beer, with a nice flavor and appearance. I feel like the malt character is a bit stronger than I really want for this style, so I might go with a 100% pilsner or pilsner+American 2-row version in the future, or mix in some Vienna malt instead. That said, though, it’s a solid version of a kölsch!
  • Overall
    • 8.5/10