What’s Brewing? May 2021 Edition

Once again, this month’s update slides in just under the wire…it has been a busy month outside of the brewery, and a busy one in the brewery! For a variety of reasons, I haven’t been brewing the past two weekends, although I did some other fermentation projects as well as a whole mess of kegging.

Beer Batch Updates

  • My California Common is now kegged, as of 9 May 2021.
  • I kegged the session ale (Easy Days Ale) on 6 May 2021.
  • I brewed the 2021 version of my white IPA on 14 May 2021, and got it kegged on 29 May 2021. Right now, I’ve got the dry hops bagged and doing their thing, with a plan to pull them out after 3 days of dry hopping at near-freezing temperatures.
  • I brewed my Dunkel-Osteus (Munich dunkel) on 8 May 2021, and kegged it at the same time that I kegged the white IPA.
  • I brewed a Schell’s Pilsner Clone on May Day, and it’s currently cold-crashing prior to kegging.

What’s On Tap?

  • Clonal Common 2021 (my California common) is on tap, and drinking very nicely. It has dropped pretty clear, and as before is a really nice take on the style.
  • Easy Days Ale, a lighter session ale that isn’t made to any particular style parameter, has been drinking super easily. It’s a really refreshing beer, and I’ve been going through it pretty quickly.
  • The schwarzbier is on its very last stretch, and will likely be finished soon. I’ve been savoring that one, because it’s just that good.

What’s Coming Up?

  • I’m planning to brew another batch of my orange summer wheat ale next weekend, to have it ready to drink about two weeks later.
  • I’ll do this year’s edition of “Mow the Damn Lawn” in June also, if all goes well.

Other Notes

  • Last weekend had a ton of fermentable food projects.
    • My sauerkraut supply is getting low, so I laid in a new batch of that.
    • For a new experiment, I made a batch of miso. The March/April issue of Zymurgy magazine had a tutorial, and I was intrigued enough to give it a go. It was quite a production, but I am hopeful that this will be well worth the effort. I had to soak the soybeans overnight, simmer them for about 6 or 8 hours, cool them, and then mash them in with koji rice grains. The concoction is now fermenting at room temperature, getting pressed under a 5 pound bag of flour atop a plate.
Miso at the start of fermentation, appearing as a beige paste with white flakes of salt on top, in a dark blue crock
Proto-miso, as it looked at the start of fermentation.

What’s Brewing? March 2021 Edition

There’s not much to say for the past month, so let’s just jump into the beer!

Beer Batch Updates

  • I kegged the orange wheat ale mentioned last time, and it’s now on tap! Such an incredibly delicious beer.
  • My latest schwarzbier is kegged and lagering; it’s super nice in initial tastes! Even after only two weeks in the lagering chamber, the beer is now brilliantly clear.
  • I brewed my 2021 edition of Alta California lager on 6 March 2021, and it’s currently fermenting along. I will start the cold crash in a day or two.
  • I had put Pilsnerpeton (a German pils) on tap for a week or two, but swapped it out for the orange wheat ale. The pils wasn’t totally clear yet, and I thought a few more weeks of lagering would help with any latent haze. Similarly, I cycled my altbier back out from the keezer, with the English IPA taking its place. Again, I wanted to condition the altbier just a bit more. The IPA and porter kegs kicked in the last few days, so I was able to get the pils and altbier back on service. The extra wait was worth it!
  • I brewed a Belgian quad this weekend, as part of a homebrew club barrel project. It was a super fun challenge to plan out such a high gravity brew on the Foundry, a setup that isn’t optimal for really big beers. I did a combination of frequent mash stirring, a long mash (2 hours!), and simple sparging to get it to the place I needed it to be. It was a loooong brew day, nearly 12 hours from start to finish, but fun as an experiment. I hit my numbers pretty closely, so I’m satisfied.

What’s On Tap?

  • My orange summer wheat ale is fulfilling the “light beer” slot, and it’s quite drinkable!
  • I just threw Pilsnerpeton back on…it’s super drinkable, as a moderately hoppy pale lager.
  • The altbier is excellent! It’s a great recipe to start with, and the extended cold conditioning cycle paid off.

What’s Coming Up?

  • I plan to do an IPA of some sort next weekend. I have some Simcoe and Centennial as well as the Samba hop blend, which seem like a good combination for an American IPA.
  • I’ll make my Schell’s Pilsner clone again soon.

Other Notes

  • My latest sauerkraut batch is now jarred up and ready to use. It turns out the 3 year old loves sauerkraut too, so we go through it at an unexpectedly rapid pace.
  • I finished up the jar of preserved lemons, by turning some of it into chicken tagine (which was delicious), and the rest into a lemon-garlic salad dressing (also delicious). While our lemons are still in abundance, I plan to make another batch. As a short-cut, I’ve found that you can grill lemons low-and-slow on the top rack of the grill while cooking other things. They get an internal consistency very similar to preserved lemons, and a nice smoky flavor.

What’s Brewing? February 2021 Edition

I’ve had to slow down my brewing pace a bit, because I have a pretty good supply of beer at the moment. Even so, I’ve managed to get a few batches in!

Beer Batch Updates

  • I kegged my altbier on 31 January 2021. It hit a final gravity of 1.013, down from 1.040, for 4.3% abv. I used priming sugar for the initial carbonation, and finished it up in the lagering chamber before putting it on tap a few days ago.
  • I kegged my English IPA on 13 February 2021. It started out at 1.064 and finished at 1.019, for 5.9% abv.
  • I brewed a schwarzbier on 6 February 2021, repitching the Harvest lager yeast from my recent German pils batch. I expect it should be pretty close to finished, and I’ll begin cold crashing it this week.
  • I brewed an orange wheat ale on 13 February 2021, using a past recipe. I grated the zest from three oranges, and that is now steeping in a few ounces of vodka, to create an orange tincture that will go in at kegging time.

What’s On Tap?

  • On my picnic tap, I’m enjoying the clone of Houblon Chouffe. It’s at peak drinkability now!
  • The London Porter is conditioning on tap; as seen with past experience, the ESB yeast is pretty slow to flocculate. After a week or so, the beer is finally starting to drop clear. The yeast seem to have stalled out during fermentation, because it was 1.025 when I kegged and is now a notch below 1.020.
  • The latest version of Alstadt Altbier went on tap two days ago. Although it needs to condition and clear up a bit more, it’s a fantastic beer already. The aroma has a malty, floral character that is just plain delicious.
  • A German pils (“Pilsnerpeton“) also went on tap two days ago. This was my first all-Viking pilsner malt recipe, and I’m pretty pleased with the results. I dropped the hop level a bit on this one (targeting ~26 IBU), because I was feeling that some of my past versions were just a touch harsh for my taste (35 to 38 IBU). This is a lot closer to what I am looking for! The beer needs to clarify a bit more (it’s had ~5 weeks at lagering temperatures), but it’s quite nice. In a side-by-side with Bitburger, the commercial pils had better clarity, but mine had amazing heading and head retention, as well as excellent flavor (see the comparisons below).
Side-by-Side, Before and After. A commercial Bitburger is the left glass, and my Pilsnerpeton homebrew is the right glass. About 10 minutes separates the two photos.

What’s Coming Up?

  • Ingredients for a Munich dunkel are on-hand, to do the 2021 edition of my Dunkelosteus. I’ve missed that beer!
  • I need to brew my Alta California Lager soon, so that it can condition for a month or two in order to be ready for the warm days of late spring. I’ve done it with both grits and flaked maize, and think I’ll be going back to a cereal mash with grits on this version.
  • I have really enjoyed having a half-batch of something “different” on-hand, and as a way to try out high alcohol or experimental beers for which I wouldn’t want a full five gallons. I’m not sure what’s next in that arena, but I’ll figure out something.

Other Notes

  • Inspired by a recent article in Zymurgy, I made a batch of preserved lemons. It took about four Eureka lemons from the tree in your yard. After around four weeks of pickling, they turned out fantastically! I made some chicken tagine last night for supper. I had been a bit worried that the rind would be too much on these versus Meyer lemons, but it wasn’t a problem.
  • I also started a new batch of sauerkraut; the previous batch is running low.

What’s Brewing? January 2021 Edition

The past month has seen some pretty steady brewing, as I push forward with recipes both new and familiar. So, here is a quick update in the waning days of January…

Beer Batch Updates

  • I brewed a Belgian IPA, intended as a clone(ish) of Houblon Chouffe, on 12 December 2020. This was a fun and challenging beer, both for its high gravity as well as managing a Belgian fermentation. It’s now kegged and conditioning; initial impressions are that it’s a really good beer, and hit my mark pretty much dead on.
  • On 28 December, I brewed a German pils with 100% Viking pilsner malt, a mix of Perle, Sterling, and Mt. Hood hops, and Imperial’s Global lager yeast. It is now cold crashing, and should be kegged this week sometime.
  • On New Year’s Day, I brewed a second version of Alstadt Alt, which was pretty tasty the first time around. The malt bill is pretty much the same, although I’ve switched up the hops and yeast slightly for what I’ve got on-hand. I should be kegging that this week, also.
  • I brewed a traditional London-style porter on 8 January 2021, modified from a Gordon Strong recipe. I kegged it on 24 January 2021, adding 3 oz. of corn sugar for priming. Interestingly, the gravity was stalled out at 1.025. I’m not sure if this is due to a high percentage of unfermentable sugars (brown malt?), or the yeast stalling.
  • Following the really tasty English IPA I made two years ago, I rebrewed the recipe on 16 January 2021. It’s pretty much identical to the last version, because it didn’t seem wise to mess with success.

What’s On Tap?

  • I’m nearly at the end of my session stout keg; it still drinks beautifully!
  • The new batch of Tremonia Lager went on tap recently, and it continues to condition a bit in the keg. It’s just now hitting the peak. I’ll sit down for a tasting with this one and write up a full report in the next week or two.
  • Aspiration Ale, patterned after a clone recipe for 90 Shilling Ale by Odell Brewing Company, is on tap and tastes so good. It has a little ways to go to clear up, but it’s pretty squarely filling the “malty but not overly alcoholic amber-ish ale” category.
  • Although my keezer only has three faucets, I’ve been running Mahajanga IPA off of a picnic tap. There’s only a little bit left, but it still is a super nice beer! Because it’s pretty high alcohol (8.5% abv), I enjoy this as an occasional one-off, so it doesn’t make sense to put it on the main serving line.

What’s Coming Up?

  • I’ve got a lot of beer in the pipeline already, so the next few weeks will focus on lagers. I’m going to repitch the yeast from the pilsner, to make a schwarzbier as well as a Munich dunkel.
  • On the lighter side, it has been a long time since I last did my orange wheat ale. I’m getting ingredients together now, and will brew this in the next few weeks.

Other Notes

  • I feel like my process with the Anvil Foundry is pretty dialed in now, and I’m consistently hitting 67 to 68% mash efficiency. I wouldn’t complain if it was a bit higher, so I might tighten the mill up just a touch. Right now I have a mill gap of 0.037″ (it was set at 0.041″ for the old mash tun), and might take it down to 0.034″ or so.
  • The cooling fan in the base of my Anvil has started acting up, with an extra bit of noise. After a bit of troubleshooting, it seems that the fan is going bad, so Anvil tech support is sending a replacement fan. I’ll note that the 18 volt, 60 mm fan type is a pretty hard one to track down otherwise!

What’s Brewing? December 2020 Edition

Since last update, I’ve been doing a ton of brewing–nearly a batch every week! Perhaps the most satisfying thing, though, was reorganizing my brewing space. It had been close to a year since the last major cleaning and reorganization, and it sorely needed some attention. I tossed out trash, reorganized my malts, put some brewing salts into jars, and so on. Organization is only temporary, of course, but it’s a nice kind of temporary.

Stygimoloch Bock

Beer Batch Updates

  • My Christmas Warmer has been conditioning for about a month now, and with another week or two should be ready to drink.
  • I kegged the session stout on 22 November, and started the carbonation with corn sugar. It finished up carbonation from the CO2 tank, and is now on tap.
  • The rebrew of Tremonia Lager just got kegged tonight. It’s happily lagering at 33° now, and will go on tap after the Pfriem Pils clone. So, it should get a good stretch of time to condition out!
  • On 21 November, I brewed a clone of Avery Brewing’s Maharaja IPA (“Mahajanga IPA”). This was my first super high gravity batch on the Foundry, and I definitely missed my numbers by a bit. I aimed for 1.088, and hit 1.077–after adding a pound of DME. This works out to about 59% mash efficiency. With the experience, though, I have a better idea of the efficiencies I can expect to achieve on the system, so future high gravity recipes will hopefully be more predictable. I’ll be kegging it in the next few days, with some dry hops.
  • On 5 December, I brewed “Aspiration Ale,” a clone of the 90 Shilling Ale from Odell Brewing. I had been wanting a red ale of sorts, and this take will definitely be in that realm. It smelled amazing on the mash–I hope this bodes well for the final product! Incidentally, this is also the first brew on the Anvil Foundry where I felt like I had a good handle on the whole process from start to finish. Practice makes perfect! I hit 68% mash efficiency, right where I want to be for a no-sparge brew.

What’s On Tap?

  • Stygimoloch Bock is drinking super nicely right now. It’s such an amazing fall/winter beer, and I’m pretty happy with the latest iteration of the recipe. I have a feeling that this keg won’t last very long.
  • “See See IPA” just went on tap (an homage to the song “See See Rider”, and a bad pun on the two “C” hops–Chinook and Cascade–that I used in the dry hop phase). It’s a modified rebrew of the Wildfire IPA I did earlier this year, mostly just adjusting the hops varieties. The beer started fairly hazy, but dropped reasonably clear after a few days. The flavor is pretty great, too. It’s a classic “Old School” West Coast IPA. For this batch, the dry hops are floating loose in the keg, and I threw a hop screen on the intake tube for my ClearBeer draft setup.
  • My session stout went on tap today, and is really, really nice. It’s beautifully clear, has robust malt character, and goes down pretty easy. It’s exactly what I want in a winter-season session beer, and the batch clocks in just shy of 3% abv by my calculations!

What’s Coming Up?

  • This coming weekend, I’m doing a half-batch (~3 gallons) of a Houblon Chouffe clone. It is another high gravity recipe, but learning from my past experience I feel like I’ve got a better shot of hitting my targets on this version! The beer is a Belgian IPA, which is a fairly new style and one I don’t think I’ve ever done before. I have fond memories of drinking it on tap at a local Belgian beer taphouse (in the Before Times), so want to give a try for my own version.
  • I have a fair bit of beer on-hand, and don’t really need to brew more. But, I need the relaxation that a Saturday morning brew provides. I think I’ll probably be doing some half-size batches, which scratch the itch and give me an opportunity to experiment a bit with reduced risk.

Other Notes

  • I’ve cycled through base malts fairly quickly as of late, and had to restock from my local homebrew shop. They’ve been carrying some of the Viking malts lately, and I got a 2-row pale malt as well as a pilsner malt, just to try something different. I also snagged a sack of Crisp’s Maris Otter malt, so put in some English-style batches in the next few months.