Monthly Archives: March 2012

IPA and Amber Ale Updates

Posted on by

A few odds-and-ends. . .

Fake Tire Amber Ale 1.1
This brew was transferred to the secondary on Sunday, February 12, after 8 days in the primary. The gravity at that time was 1.012, down from 1.050 (giving a current ABV of 5.0%). Unlike the first version of this recipe, I did not get an estery aroma out of the primary fermenter – maybe because I fermented at a slightly lower temperature?

Fake Tire 1.0

Fake Tire Amber Ale 1.0
The original version of this recipe has conditioned very, very nicely, and as a result I’ve been drinking it with some regularity. A few weeks back a friend and I did a blind taste-test with the commercial version of Fat Tire. My version is a little less bitter and just a shade darker. Otherwise, they’re quite similar. In some ways, I prefer my slightly less hoppy version; it will be interesting to see how version 1.1 varies.

Socks-Off IPA
On January 5, I transferred this IPA over to the secondary fermenter; the gravity at that time was 1.024. On January 19, I added 2 oz. of Northern Brewer hops pellets directly to the fermenter (no hop bag). I let this mixture dry-hop until February 12, when I bottled the brew. The final gravity was 1.021, yielding an ABV of 6.7%. I ended up with four 22-oz. bottles, 21 pint bottles, and 13 12-oz. bottles.

This is a solid IPA. It has a subtle hop aroma, and a clear, coppery hue. The flavor is appropriately bitter, but perhaps the only fault is that it is a shade on the sweet side.

Brewing Plans for the Rest of Winter 2012
Time is growing short, before the temperatures inch their way up too far. My summer ale is in the primary fermenter now, and I’m considering doing a wheat beer to close out the season. If that happens, it will have to be next weekend. Finally, I have five pounds of honey that I’m planning on turning into mead. My understanding is that you can ferment mead at a reasonably high temperature, so that will be my “anchor” for Winter 2012.

Claremont Summer Ale

Posted on by

The brewing season is nearing an end here in southern California, so it’s time to stockpile some refreshing beers for the coming warm months. I also had a few packages of grains and hops pellets sitting around that needed to be used up. The result: a recipe for Claremont Summer Ale. I built the recipe in BeerSmith, using the Blonde Ale style as a rough guide.

Claremont Summer Ale

  • 6 oz. 20°L crystal malt
  • 8 oz. carapils malt
  • 8 oz. Munich malt
  • 3 pounds light dry malt extract
  • 3 pounds pale (extra light) dry malt extract
  • 1 oz. Cascade pellet hops
  • 1 oz. Mt. Hood pellet hops
  • 1 tsp. Irish moss
  • 1 package East Coast Ale Yeast (White Labs #WLP008)

 Steps

  • I heated 3 gallons of water to 158° F, and steeped the grains at this temperature for 1 hour (plus or minus a few degrees).
  • Then, I sparged the grains with a gallon of water, bringing the brew kettle up to 4 gallons total. Upon heating the mixture to boiling, I turned off the heat, added the DME, and brought it all back to boiling again. The Cascade hops were added.
  • After 45 minutes of boiling, I added the Irish moss.
  • After 58 minutes of boiling, I added the Mt. Hood hops.
  • After 60 minutes of boiling, I removed all of the hops and chilled the wort.
  • I decanted the mixture (except 0.5 gallons of trub) into the primary fermenter, and topped up with water to 4.75 gallons. The temperature was 68° F, and I pitched the yeast directly in.
  • BeerSmith estimated my starting gravity to be 1.057 (slightly outside the blonde ale style), with 18.1 IBUs, a color of 6.7 SRM, and estimated ABV at 5.5%. The actual starting specific gravity was 1.052, and I expect the color will be a little lighter than estimated too. The most likely reason for this is that I poured off such a healthy amount of trub. The end result is that I should be within the style for a blonde ale (for whatever that’s worth).